Nikon SF-210 /SF-200 question

I understand these 'plug in' to the inside of an LS4000/LS5000 scanner
to draw it's power supply. I'm wondering if it is drawing it at mains
voltage, or at a transformed voltage. The reason for asking this is to
determine if it's OK for me in the UK (240v) to buy an SF-200 or SF-210
from the US (120v).

Thanks.

.

Relevant Pages

  • Re: Beginner help building 5V power supply
    ... program that helps me draw schematics using text characters? ... add that a higher voltage rated filter capacitor would be ... voltage they will "see". ...
    (sci.electronics.basics)
  • Re: Electrical issues please help...
    ... Sounds like a loose connection somewhere in the supply line. ... draw you will measure full voltage but as soon as there is a current draw, ... the loose connection will cause a voltage drop. ... outlets are reading errors and will not test. ...
    (rec.games.pinball)
  • Re: quick question about watts.
    ... The voltage applied to the lightbulb would be 10 volts. ... higher voltage when you draw less than rated current. ... as much resistance as it does at 300 K, not all that close to proportional!) ...
    (sci.electronics.basics)
  • Re: Generator
    ... usually exagerated generator rating. ... The Back EMF limits how much current the motor will ... Different motor types act differently when the voltage is ... to slow down and draw more current. ...
    (sci.engr.joining.welding)
  • Re: I need more power!
    ... Go to Fairchild Semi and look around for SOT-23 logic level FETS. ... them the appropriate voltage, around 3.5v they draw 20mA of current. ...
    (sci.electronics.design)