Re: Problem with HP5P

Tony Stanford <tonystanford@xxxxxxxxxxxxx> wrote:
>In message <part1of1.1.fxKUidWrluHxTg@xxxxx>, Tony
><TonytheTigurrrrr@xxxxxxx> writes
>>If the fuser resistances are OK and the two fuses are OK then the DC
>>controller has failed
>
>On second thoughts, what do you think the probability is that it is just
>a fuse? Are the fuses easy to get to?
>--
>Tony Stanford

Tony
Unfortunately no, you have to remove the DC controller to get at the fuses, and
they very rarely blow. There is just a slim chance that they have however.
Tony
.

Relevant Pages

  • Re: Got the BH home..... initial findings/issues
    ... the fuses and they're ok. ... pulled the controller board and went to picking with the ... Q64 actually has been hot enough to discolor the board. ... Q16 controls L15 ...
    (rec.games.pinball)
  • Re: WPC Dot Matric Controller broke - worth fixing?
    ... I should add that there is power going to the board. ... there's certainly power going thru the fuses. ... swapped another controller and it works so I know it's the controller ...
    (rec.games.pinball)
  • Re: =?ISO-8859-1?Q?Anf=E4ngerproblem=2C?= mikrocontroller
    ... wenn die Fuses auf den internen R/C-Oscillator eingestellt sind ... Wenn du die Fuses auf einen externen Oszillator ... umstellst, laesst sich der Controller auch nur noch programmieren, wenn ...
    (de.sci.electronics)
  • Re: Energy saving better than alternative energy.
    ... So there's no fuses on the mains leads for the servers? ... There's nowhere for a fuse to go, since 13A plug tops are ... but the controller had to be able to identify a ...
    (uk.transport)
  • Re: Problem with HP5P
    ... >>This light pattern is a fuser error as you have already surmised Things ... >>two fuses are OK then the DC controller has failed. ... Tony ...
    (comp.periphs.printers)