Re: Problem with HP5P

Tony Stanford <tonystanford@xxxxxxxxxxxxx> wrote:
>In message <%kXif.648292$1i.578773@pd7tw2no>, Arthur Entlich
><e-printerhelp@xxxxxxxx> writes
>>They do fail, but they also do blow fuses sometimes. There are usually
>>3rd party parts dealers one the web for these types of things.
>
>Thanks. I'll try to find the fuses. I don't know where they are, and
>can't get the plastic shell off, although I've undone every screw in
>sight, and tried to unclip those irritating plastic clips.
>--
>Tony Stanford

Tony
Instructions for the removal of the case will be in the stuff I send you. It's
a bit of a pig to remove the case and you have to be quite determined. The
fuses are on the DC Controller, instructions for getting at that will also be
in the package. Fusers are available and so probably are thermistors and fuser
lamps but if you can use an ohm meter you will know what you need once the
fuser is out.
Tony
.

Relevant Pages

  • Re: Problem with HP5P
    ... >>This light pattern is a fuser error as you have already surmised Things ... >>two fuses are OK then the DC controller has failed. ... Tony ...
    (comp.periphs.printers)
  • Re: Problem with HP5P
    ... In message, Tony writes ... This light pattern is a fuser error as you have already surmised Things to check are the resistance of the fuser lamp and thermistor and check 2 fuses on the DC Controller. ...
    (comp.periphs.printers)
  • Re: How does Floating MOSFETs in a PROM actually create a group of instructions?
    ... How does the Floating MOSFET array in a PROM turn into a group of ... you burn the "fuses" allowing for either a 1 or a ... All uP instructions are nothing more than data. ...
    (sci.electronics.design)
  • Re: Problem with HP5P
    ... >>If the fuser resistances are OK and the two fuses are OK then the DC ... >Tony Stanford ... Unfortunately no, you have to remove the DC controller to get at the fuses, and ...
    (comp.periphs.printers)
  • Re: WTF- AFM cabinet sheet
    ... Joseph "Tony" Dziedzic ... This has fuses, switch matrix, Lamp matrix,etc. ...
    (rec.games.pinball)