Re: HP LJ 2200 Blank Pages Problem
- From: "Bob Kos" <see@xxxxxxxxxxxxxxxx>
- Date: Wed, 31 Aug 2005 19:34:30 GMT
<Tony> wrote in message news:part1of1.1.jbCMQoaDK$40Uw@xxxxxxxx
>
> Several possibilities but first of all you need to carefully look at the
toner
> cartridge. Hold it as if you are going to put it in the printer, look at
the
> top near the left hand side, there should be a plastic tab about one inch
from
> the left and about 1/2 inch high almost triangular. This opens the scanner
door
> when you put the cartridge into the printer, if this broken (seen a few of
> those) or even slightly bent (should be dead vertical) the scanner door
will
> not open and you will print blank pages. The printer does not check to see
if
> the door is open.
> Check that first.
> Tony
Hi Tony:
Thanks for your reply. I have checked the toner cartridge as you have
suggested above. It looks fine. I went one step further by pulling the
upper cover off and removing the cover from the laser housing. I then
inserted the cartridge and watched for movement of the metal door. It
swings 90 degrees and allows a seemingly clear path from the lense to the
prism at the front of the laser housing.
You mention that there are several possible problems that may cause the
problem I'm having. Can you offer any other suggestions?
I appreciate your help.
.
- Prev by Date: Re: HP LaserJet 4P Manual needed
- Next by Date: Re: HP 2550 - Chip
- Previous by thread: Re: HP LaserJet 4P Manual needed
- Next by thread: Re: HP LJ 2200 Blank Pages Problem
- Index(es):
Relevant Pages
|
