Re: how to install RTL driver for vxwork in X86 architecture

On Mar 27, 6:18 am, "dharmendra" <vasadia.vxwo...@xxxxxxxxx> wrote:
Hi Gavin,

Thank you very much for reply.
i have solved my problem using your advice.
i got following line in config file and successfull install rtl
driver.

#define DEFAULT_BOOT_LINE \
"rtl(0,0) bradwell:/folk/dyates/rtl/vxWorks h=147.11.90.40
e=147.11.90.167 u=dyates"

one more thing i wanted to ask is
i understood rtl(0,0), but what about bradwell:/folk/dyates/rtl/
vxworks.
if i want to make cross connection between host and target using
ethernet card, do i have to change this? and have to set path
according to drive in which i have made vxworks image

could you please write the above path with example: suppose i have
made project in
modem folder, which is stored in D driver of my PC. what path i
suppose to write instead of

bradwell:/folk/dyates/rtl/vxWorks

thank you very much
regards

Dharmendra

Breaking down your existing path, I assume that bradwell is your
target server. That will have a default path that should point to the
image you want to be loaded. At present this takes the default and
then goes into the subdirectory "/folk/dyates/rtl". To get this to
point to your new image under D: you will need to reconfigure the user
"dyates" home location on the target server.

Gavin Nottage
Harmonic Software Systems Ltd
www.harmonicss.co.uk
gavin DOT nottage AT harmonicss DOT co DOT uk

.

Relevant Pages

  • Re: What if the DOT violates HOS Regs???
    ... It's basically a circle route, with each driver doing part of the circle. ... My break was shortened BY DOT. ... would have, run it legal, but it was DOT that violated the HOS regs. ...
    (misc.transport.trucking)
  • Re: Non-CUPS Printer Drivers on OS X
    ... _if the printer driver was properly CUPS-compliant_. ... Past experience also suggests that setting that printer to be shared ... Actually it's much easier to share PostScript printers than non-PS printers. ... email to oshea dot j dot j at gmail dot com. ...
    (comp.sys.mac.system)
  • Re: Developing a driver targeting both 5.0 and 6.0
    ... I was actually wondering about the dot verisons. ... I guess the idea is to target new hardware folks so ... But if you're a driver developer, or even a WM 5.0 or 6.0 developer who ... It is important to understand that WM versions do not match Windows CE ...
    (microsoft.public.windowsce.embedded)
  • Printer driver: Calling EngBitBlt from DrvBitBlt ok to do?
    ... driver is for doesn't handle ... by creating a bitmap and calling EngBitBlt instead of passing the request to ... Scott dot Robins at usa dot xerox dot com ...
    (microsoft.public.development.device.drivers)
  • Re: LCD monitor - missing OSD
    ... Your link goes to their dedicated support site ... was no help and it refused to load the 100B2 driver. ... standard resolution in XP, the nVidia Control Panel ... j dot mccartney atte blueyonder dot co dot uk ...
    (comp.sys.acorn.hardware)