Re: How do I install it?

William L. Hartzell wrote: 
Sir:

philo wrote:

chevysrock39@xxxxxxxxx wrote:

I have the os2 warp v4 cd, but how do i install it? i put the cd in,
restart, and it still loads windows.

you need to set the bios to boot first from cdrom

The Warp 4 CD was not bootable. He needs the kicker floppy disks and if he has a larger than 2-4 GiB hard drive, he'll need the updated kickers from IBM on-line device driver site. 


really?

in truth i've never done a warp4 installtion
but my warp3 cd is bootable

.

Relevant Pages

  • Re: How do I install it?
    ... you need to set the bios to boot first from cdrom ... he has a larger than 2-4 GiB hard drive, he'll need the updated kickers from IBM on-line device driver site. ...
    (comp.os.os2.misc)
  • Re: Cant get A7V133 to boot from USB floppy or CDROM
    ... upgrade the BIOS in the 1st place, but I didn't think the V1004 BIOS ... supported on all BIOS versions, and VOILA, the mobo was able to boot ... CPU and also booted to either CDROM or USB floppy. ...
    (alt.comp.periphs.mainboard.asus)
  • Re: cd writer missing after F7 upgrade
    ... On 6/1/07, Frank Cox wrote: ... The default bios SATA setting of "enabled" worked fine with FC6; ... booted off of the hard drive and found the cdrom and everything. ... SATA P1/P3,PATA won't boot at all and doesn't detect the cdrom in the bios. ...
    (Fedora)
  • Re: I cant boot from CDROM : old BIOS ...
    ... > I have a rather old motherboard and the BIOS doens't allow to boot ... I've already updated the BIOS but it's a quite old one ... > CDROM, hard disk) like we see on current BIOS? ... drives and booting any hard drive. ...
    (comp.os.linux.setup)
  • Re: cd writer missing after F7 upgrade
    ... The default bios SATA setting of "enabled" worked fine with FC6; ... booted off of the hard drive and found the cdrom and everything. ... Changing the SATA setting to "legacy" gives me several choices. ... SATA P1/P3,PATA won't boot at all and doesn't detect the cdrom in the bios. ...
    (Fedora)