Re: Strange PEER error with Dani's 506 1.81 generic question

Thanks Ilya ..

Ilya Zakharevich wrote:


I see absolutely no problem with burning to a slave IDE burner sitting
on the same IDE channel as the HD with files I burn in.

Just do not forget to give something like --buffer-check 60 to dvddao.

Hope this helps,
Ilya

So noted for much more research work and learning I have in front of me!


--


--> Sleep well; OS2's still awake! ;)

Mike Luther
.

Relevant Pages

  • [ANSWER] Major speed problem with reads from JFS
    ... After a long series of mail exchange with the author of DvdDAO, ... Turned out that my crazy theories were 100% matched by experiments. ... There is no *inherent* problem with burning over an IDE channel ... the burn, the longer may be the wait. ...
    (comp.os.os2.setup.storage)
  • Re: CD-blanking leads to machine freeze with current -git [was: Re: CD writing in future Lin
    ... My guess is that your burner and hard drive are both on the same ide channel, and so you can not access the disk while the burner is blanking. ... It takes hard drive access to switch window focus? ... If the program you try to switch to (or, say, part of X or your window manage) is swapped out for some reason, then yes, changing focus may cause said program to hang until it can swap the data in. ... Usually that's a small fraction of a second, but if your IDE bus is waiting for a burn, then it could be the duration of the burn. ...
    (Linux-Kernel)
  • Re: dvds not recognized
    ... 1)Next they had me change the unit to Master on IDE channel 2 on its own lonly ribon. ... 3)They had me remove checks from use this drive to burn cd.s in advance setting of the drives properties in the device manager. ... They sent me alink to update ascpi driver 471.2 from adaptecs site. ...
    (microsoft.public.windowsxp.help_and_support)
  • Sony DRU 500ax DVD will not recognize DVDs
    ... 1)Next they had me change the unit to Master on IDE channel 2 on its own lonly ribon. ... 3)They had me remove checks from use this drive to burn cd.s in advance setting of the drives properties in the device manager. ... They sent me alink to update ascpi driver 471.2 from adaptecs site. ...
    (microsoft.public.windowsxp.help_and_support)
  • RE: Crashes with DVD/CD drive
    ... 1)Next they had me change the unit to Master on IDE channel 2 on its own lonly ribon. ... 3)They had me remove checks from use this drive to burn cd.s in advance setting of the drives properties in the device manager. ... They sent me alink to update ascpi driver 471.2 from adaptecs site. ...
    (microsoft.public.windowsxp.help_and_support)