Re: Dani's 183 driver
- From: "William L. Hartzell" <wlhartzell@xxxxxxxxx>
- Date: Mon, 07 Apr 2008 16:09:41 -0500
Sir:
Chuck McKinnis wrote:
On Sun, 6 Apr 2008 10:54:41 UTC, "Mark Klebanoff"I did not see in your report which version of the operating system has
<maxikins@xxxxxxxxxx> wrote:
I installed the new version of Danis506.add and upon rebooting I got
an "OS/2 is unable to operate your hard drive" message. In all the
updates to that driver I've installed, that's never happened before.
I have a Gigabyte GI-8IK1100 motherboard with an Intel SATA disk
controller. Restoring the 182 version worked fine.
You are not alone. I have a ThinkCentre M50 with an Intel SATA disk
controller. Same message. Same recovery.
Vendor 8086h Intel Corporation
Device 24DBh 82801EB/ER (ICH5/ICH5R) EIDE Controller
Not quite sure how to report it to Daniela. Cannot get far enough up
to get the diagnostics.
this bug with Dani's driver. You do know that this could be a bug in
ACPI driver if you are running that driver? Here I am assuming that
ACPI driver writer has implemented the configuration specification that
came with ACPI.
--
Bill
Thanks a Million!
.
- References:
- Dani's 183 driver
- From: Mark Klebanoff
- Re: Dani's 183 driver
- From: Chuck McKinnis
- Dani's 183 driver
- Prev by Date: Re: Dani's 183 driver
- Next by Date: Re: Sudden NVC5.8 OS/2 failure April 2, 2008
- Previous by thread: Re: Dani's 183 driver
- Next by thread: Re: Dani's 183 driver
- Index(es):
Relevant Pages
|