Re: LabView 8.2 and old NI-DAQ 6.7 VB6 applications on same computer
- From: Nick_CH <x@xxxxxxxx>
- Date: Fri, 27 Apr 2007 17:40:08 -0500 (CDT)
Hello Shane,
In my opinion, there is no problem to continuing using the PCI-6602 and
PCI-6052E with VB6 and the NI-DAQ6.7 in the same time as developing you new
application with LabVIEW 8.20.
The PCI-6602 and the PCI-6052E are supported by the traditional DAQ (NI-DAQ)
and the new driver NI-DAQmx
What I will suggest you:
- Install Labview 8.20 and the new driver NI-DAQmx (the last version is the
8.5) for your new development
- keep installing VB6 and the NI-DAQ6.7
PS: Both driver can be installed in the same computer. In MAX (Measurement
& Automation Explorer), You will see the cards under both drivers
To understand how using the new NI-DAQmx driver, have a look on
<a href="http://zone.ni.com/devzone/cda/tut/p/id/5434"; target="_blank">www.ni.com/gettingstarted</a>
Best regards
Nick_CH
.
- Follow-Ups:
- Prev by Date: LabVIEW takes a long time to call a function in .NET
- Next by Date: How to reconfigure 1/3 octave band data so that cursor can only go to the center band frequencies
- Previous by thread: LabVIEW takes a long time to call a function in .NET
- Next by thread: Re: LabView 8.2 and old NI-DAQ 6.7 VB6 applications on same computer
- Index(es):
Relevant Pages
|
