Re: counting ttl pulses with Count_Events-Easy (DAQ-STC)

I've added a step to measure the timing of the loop, and have found
that sometimes it 'skips a beat'.  As in, occasionally the delay
between steps is 0 ms, although usually it's not.  Is this a
memory management problem?  Is there a better way to specify the
timing of the signal collection?


Ian_count_with_DAQmx_attempt4_working.vi:
http://forums.ni.com/attachments/ni/170/131762/1/Ian_count_with_DAQmx_attempt4_working.vi
.

Relevant Pages

  • Re: Write Signal on Disk II Question
    ... checked for sampling jitter using an oscilloscope? ... But I noticed another shocking thing: The timing loop I used to find ... the timing resolution is quite high, since the delay loop on the main ...
    (comp.sys.apple2)
  • Re: Write Signal on Disk II Question
    ... checked for sampling jitter using an oscilloscope? ... But I noticed another shocking thing: The timing loop I used to find ... the timing resolution is quite high, since the delay loop on the main ...
    (comp.sys.apple2)
  • Re: Write Signal on Disk II Question
    ... checked for sampling jitter using an oscilloscope? ... But I noticed another shocking thing: The timing loop I used to find ... the timing resolution is quite high, since the delay loop on the main ...
    (comp.sys.apple2)
  • Re: Write Signal on Disk II Question
    ... checked for sampling jitter using an oscilloscope? ... But I noticed another shocking thing: The timing loop I used to find ... the timing resolution is quite high, since the delay loop on the main ...
    (comp.sys.apple2)
  • Re: Electric Duet - How to extract the music Player and a song?
    ... and timing two durations. ... machine cycles required by the loop. ... However, the timing constraints are very tight, and some tricks ... I use an Applesoft program to schedule the "work" code into the 32 ...
    (comp.sys.apple2.programmer)