Re: DOS only enviorment
- From: Sylvain Larche <iosys@xxxxxxxxxxxx>
- Date: Fri, 24 Mar 2006 21:40:55 -0500
Robert J. Stuart wrote:
Sylvain, Thanks. This just might work for me. Although in my initial
tests, I have tried to set this up on a floppy only boot system, and the
setup wants to set it up on the C drive. I will work this out and see if I
can get it to boot up on a floppy only system.
Bob S.
It does work with floppy only i did it. First install in a hard disk then copy the content of c:\net to the floppy under a:\net
create appropriate autoexec.bat and config.sys.
for the loggin check file system.ini in c:\net and change to required
value it works for m. I use this disk when the local hard drive fail
once connected, i do a FORMAT C: /S from the boot disk then I run a special program on the F: drive(network Drive) to rebuild the content
of the new hard drive (replacement)
Hope this help
Sylvain Larche
IoSys Technologie Inc.
iosys@xxxxxxxxxxxx
.
- References:
- DOS only enviorment
- From: Robert J. Stuart
- Re: DOS only enviorment
- From: Sylvain Larche
- Re: DOS only enviorment
- From: Robert J. Stuart
- DOS only enviorment
- Prev by Date: Re: DOS only enviorment
- Next by Date: Norton Guide Databases
- Previous by thread: Re: DOS only enviorment
- Next by thread: Norton Guide Databases
- Index(es):
Relevant Pages
|
