Re: Networking issue

On 2008-08-18, h foorsa.biz wrote:

Thanks for your reply
NAT is not a sloution for my problem as i know
i already have a real IP address and domain name i configured my
machine with real ip
all i want to do is to attach that machine on same switch acting as
gateway to computers with private ips then expose it to the gateway
which is my third or fourth network hop to the internet you can
configure it as follows i wanna attach web server with real ip address
to a swtich which acting as a gateway to computers with private ips that
switch is connected to other switch which connected to the internet
gateway

And you really do believe that your network guys will let you expose a
machine not under their control on a secured LAN to the public internet?
That's what a DMZ is for. If they use VLANs on the switches, it might be
possible to provide the public IP network on your switch port, otherwise
I don't think they will patch your port to the public part of their network,
as this will probably involve running new cable in the building or at least
between racks. Listen to them and just move your machine.
.

Relevant Pages

  • RE: Protecting the enterprise wireless network
    ... They way we set a similar wifi network is using 2Wire wifi access points ... connected to a Foundry switch, ... connection, ... You probably have several Mbs in Internet access, ...
    (Security-Basics)
  • Re: Non-domain connection problem
    ... Yesterday I even hardcoded the DNS of a local ISP into the TCP/ip properties ... Connect to Internet from Internal Network ... Notice that the default gateway and DNS IP addresses are different, ...
    (microsoft.public.windows.server.sbs)
  • Re: Possible case of ip forwarding
    ... I have a desktop running windows and a laptop running FC6. ... Laptop is able to access internet without any issues. ... I changed my desktop's default default gateway to be my ... Laptop's gateway is the default gateway of the network. ...
    (Fedora)
  • Re: One computer on 2 networks
    ... The gateway setting on the 172.30 NIC should be blank. ... If they are not all 172.30 you need to use a shorter network mask (so ... How exactly would the Route Add sentence be? ... and yours must point to the Internet gateway. ...
    (microsoft.public.windows.server.networking)
  • Re: Very small network question...
    ... If you have something between them (like a switch or hub) you need 'normal' ... You have to set the gateway ONLY if you have a gateway in your network. ... an Ethernet-enabled target board with a static IP. ...
    (comp.os.linux.networking)