Re: Controllable Digital Picture Frames

In comp.home.automation, Warren Block wrote:
Mike Barnes <mikebarnes@xxxxxxxxxxxxxx> wrote:
In comp.home.automation, Warren Block wrote:
Digital picture frames could be very useful as annunciators if a host
computer could at least tell them "switch to picture x now". Even
better would be the ability to download a new image and display it
immediately. Think of it as a slow frame buffer.

There are now 15" versions, and even those little keychain 1" displays
might be useful.

Web searching shows that the documents on most frames are unhelpful or
nonexistent.

A cheap notebook computer could be made to do this. The digital picture
frame advantage would mostly be form factor. Power consumption and
price are lower than a notebook for the smaller versions.

Are there any digital picture frames that can be controlled by a host
computer via USB or Ethernet?

I'm not sure what kind of "host computer" you're talking about, but if
it's a PC, wouldn't a second (third, etc) monitor do the job? If not,
why not?

Yes, general PC. Additional video cards can be used, except it somewhat
limits where the extra display can be located. There are slot and OS
limits on additional video cards, and you need another VGA cable for
each monitor.

I deal with this using CAT5 VGA extenders.

USB gives fair distance, particularly with repeaters or powered hubs.
Ethernet is even better.

I've seen (but not examined in detail) USB devices that claim to give
you one or more extra monitors, and hopefully they have VGA rather than
digital outputs. I'd put one or more local to the PC and use CAT5 VGA
extenders to get the signal where it's needed.

[...]
What really started me thinking about this was searching for a small
text LCD and seeing the prices on them. A 16-character, two-line serial
display can be $80. A 7" DPF can display color bitmaps for less and
wouldn't need a serial port.

The 8" VGA monitors I used cost rather about twice that, and give an
800x600 display and the flexibility for me to put what I want on it.

http://www.thedowerhouse.com/jukebox/ourmonitors.html

The hardware in mass-market DPFs certainly could do it; it's just a
matter of firmware. (Sounds like "Solving the problem is left as an
exercise for the student.")

Agreed. Frustrating.

--
Mike Barnes
.

Relevant Pages

  • Re: Windows 7, Media Center, and S-Video
    ... When in clone Mode the resolution sent to the second display will always be the same as that sent to the primary display regardless of what the resolution of the secondary display is set to. ... You have to use Extended desktop mode to send different resolutions to the two displays. ... It almost sounds as if if the monitor is set to be the Primary display instead of the TV. ... but once I unplug the VGA monitor the TV goes dark. ...
    (microsoft.public.windows.mediacenter)
  • Re: Fuzzy display on SyncMaster 710T
    ... If you were using VGA, I'd switch to DVI-D and see if the problems ... Despite its age, it has always been a reliable monitor, so I'm guessing the recent fuzziness has ... If I switch off the monitor and then switch it back on again, the display resolves to normal clear ... If your monitor has 6 bits per pixel, instead of 8 bits per pixel, ...
    (microsoft.public.windowsxp.hardware)
  • Re: How do I get a full screen through my TVs VGA input?
    ... VGA is 640x480 and SXGA is 1280x1024. ... monitor if it is a digital technology moniotor such as LCD. ... > displayed with the top and bottom cut off in Standard display mode and at ... you have a video card and not onboard... ...
    (microsoft.public.windows.mediacenter)
  • Re: Slightly o/t: PC on widescreen telly
    ... You can have either a reasonable 16:9 display on the telly & a crap display on the monitor or vice versa. ... If you have a true 1024x768 telly with non-square pixels then you have to do something on the graphics card to correct for this. ... I have not yet made the move to HD so I have solved the problem by using a VGA-composite converter which allows me to scale & position the picture so that it is acceptable on the monitor & looks OK on the 16:9 telly or my 1024x768 projector. ...
    (uk.tech.digital-tv)
  • Axion CRT display strangeness
    ... out (not due to any sw feature), ... the monitor with no change. ... This display goes up to 1152x870, which doesn't thrill me, ... the picture are very bright, and appear to be "folded" back ...
    (comp.sys.mac.system)