Re: Insteon Test Report

In article <C6Hsf.8311$ka.7161@xxxxxxxxxxxxxxxxxxxx>, br@xxxxxxxxxxxxxxxx (BruceR) writes:
| Of course, I was so frustrated by the other stuff that I forgot to do
| that test. Here are the results:
| I plugged one Insteon Appliance Module, one Insteon Tabletop
| Controller, one Leviton X10 Signal Generator and one ELK ESM1 into a
| basic powerstrip. The Insteon module responded flawlessly to every on
| and off command sent from the controller and the ESM1 did indeed report
| it as noise by turning off the green light about 2 seconds after the
| Insteon signal was sent. I then plugged the controller into various
| outlets around the house and it worked fine (except ,of course, from the
| infamous bathroom).

Could you repeat this test but substituting a standard X10 mini or maxi
controller with the DIM or BRI button wedged on for the Leviton signal
generator?

Dan Lanciani
ddl@danlan.*com
.

Quantcast