Re: Connect home audio receiver to computer

"treeloaf" <tdickson9353@xxxxxxxxxxx> wrote:

>Mitch,
> First, thanks for the reply. When you say a "line level input", the
>only options on this particular receiver are:Tape-In, Tape-Out, Aux,
>Phono, Poweramp In, PreAmp Out( I know it isn't these two) and of
>course the mounts for the speakers. I was going to cut the RCA ends
>off, and attach these to the speaker Right and Left channel post and
>connect the other end to the sound card. Am I still headed in the wrong
>direction?

Tape out or preamp out, then a Y cable RCA to small plug for the line in
on your computer. That will let you record on the PC from the receiver.

OR

Y cable from line out on the sound card, over to Aux or Poweramp in on
the receiver, to use your receiver and big speakers from the PC.

The required Y cable is available at RadioShack, and like everyone else.
.

Quantcast