Sample rate and baud rate issue

I'm working on FSK demodulator with the TMS320C6711 DSK. I've done this
demodulation with the method where the signal and its delayed version are
multiplied together and then low-pass filtered. But this demodulation
technic is only working if the sample rate is an integer multiple of the
baud rate. Does someone know a technic or an algorithm which allow a
demodulation of a 300 baud rate signal with a 8000hz sample rate? Is there
an other technique that's not as sensitive to this?

thanks,

Benoit


.

Relevant Pages

  • Re: Sample rate and baud rate issue
    ... demodulation with the method where the signal and its delayed version are ... technic is only working if the sample rate is an integer multiple of the ... an other technique that's not as sensitive to this? ...
    (comp.dsp)
  • Re: Sample rate and baud rate issue
    ... demodulation with the method where the signal and its delayed version are ... technic is only working if the sample rate is an integer multiple of the ... demodulation of a 300 baud rate signal with a 8000hz sample rate? ... I do not think there is a practical technique that will allow ...
    (comp.dsp)
  • Re: Hilbert Transform code
    ... Maybe the OP meant demodulation; ... I at first mistook his carrier frequency to be 8000 KHz. ... At the actual frequencies and with that sample rate, peak detection won't work for AM, so he does need the quadrature signal. ...
    (comp.dsp)
  • Re: Sample rate and baud rate issue
    ... technic is only working if the sample rate is an integer multiple of ... demodulation of a 300 baud rate signal with a 8000hz sample rate? ... before you do the delay-multiply operation. ...
    (comp.dsp)
  • Re: Need Help on Costas Loop for coherent GMSK demodulation
    ... I saw in google that costas loop can be used as the carrier recovery ... is it a reliable technique for GMSK demodulation? ...
    (comp.dsp)