Re: Why translate center frequency (instead of band edge) to baseband?

I believe you have it backwards. If you mix your signal's center
frequency to baseband then it may be low pass filtered. If you don't,
you'll have to utilize a band pass filter, which would require more
taps for equivalent ripple and rolloff.

.

Relevant Pages

  • Re: Butterworth delay
    ... - sometimes referred to as running the filter both backwards and forwards.. ... Phase distortion due to non-linear phase responses ... caused by the time it takes for a DSP ...
    (comp.dsp)
  • Re: Filter problems with dataview webpart from sharepoint
    ... works the first time through but if you go backwards the document list DVWP ... > I've 2 dataviews shown as dropdownlist to filter the 3rd dataview. ...
    (microsoft.public.sharepoint.windowsservices)
  • Re: Getting samples from single filter
    ... >>>It should be noted that applications typically do not call IMemInputPin ... >> you don't get a sample from the filter. ... the naming is very confusing and feels very backwards. ...
    (microsoft.public.win32.programmer.directx.video)
  • Re: Audio scrub
    ... If the user drags the slider to the left, I want to scrub ... it backwards. ... Maybe I need to write another filter? ... Or is there some filter that already dose that? ...
    (microsoft.public.win32.programmer.directx.audio)
  • Re: Spectral Shaping using a PLL Loop Filter
    ... "baseband" is a NRZ square wave switching the profile pin on a DDS. ... For simplicity, I want to use the PLL loop filter for spectral shaping, ... you want to give the closed loop transfer function ...
    (comp.dsp)