Re: urgent - pls help
> can we use the same equipment that we have been using with Comcast
Yes. After registering (one computer connected directly to the modem), open
the modem gui (
http://192.168.0.1), click on advanced, click on PPP
Location, choose PPP on Computer. Follow the instructions on screen (the
modem access code is on the bottom of the modem) and wait for it to restart.
Connect the modem to the router. Set your new
emailaddress(at)sbcglobal.net and password as the PPPoE userid and password
in the router.
Hopefully your region doesn't get the 1070b modem, 'cause the above
instructions only apply to the 5100B and 4100B.
.
Relevant Pages
- Re: [SLE] Router and 2 PCs question(s)
... > John B wrote: ... It is the router that will control the modem, ... the instructions look to me to read ...
(SuSE) - Getting USB ADSL modem to start at boot time ...
... Running Mandrake 10.1 Official with Fujitsu FDX310 USB ADSL modem. ... Have followed instructions for question 5 at ... "Before you create these links, ensure that the S90 is relevant, this ... According to some systems (reverse kill ...
(comp.os.linux.setup) - Re: Comcast
... Comcast has recently upgraded service in some areas from 3.0Mbps to 4.0Mbps. ... You should following the instructions below, ... To take advantage of the speed increase, simply unplug your modem, wait 60 ... For three months, I didn't have a problem with using my router a When I got home today, my internet connection was not detected. ...
(microsoft.public.windowsxp.network_web) - Re: SYN Port Scan Attack
... Nancy, I'm sorry I left out a step, the instructions should have been ... Start, Run, Command, then inside the box type Ipconfig/all. ... If you just have a cable modem the easiest way to get a new IP is ...
(microsoft.public.windowsxp.general) - Cant send or receive fax via internal modem
... I followed apple's instructions on sending a fax to no avail. ... connected to the phone outlet using an AT&T cord since the phone ... for modem to become available" message. ... connection to the internet, I assume that the modem is not used at ...
(comp.sys.mac.apps) |
|
