Re: Point-to-Point VPN HW Vendor Suggestion?

Marpilli <marpilli <dOt>bon@xxxxxxxxx> wrote:
> I'm looking for equipment recommendations to setup a point-to-point
> hardware VPN between two locations.

> Both locations are broadband. The 'A' Side has a static IP. ALL traffic
> from site 'B' will be pushed through the tunnel to side 'A'.

> I've been looking at purchasing a couple of Netgear FVSxxx models or D-Link
> DI-80xHV models.

> Any thoughts on either vendor? Does Linksys or any other have a simple
> cost-effective solution?

> Thank you,
> Marp


I have setup and used Zywall-10, D-LINK DI-804HV and Netgear FVS328.

The Zywall-10 was the first reasonably priced VPN/Firewall appliance.
It is, in todays standard, very old, slow and difficult to configure. However,
it does have the best firewall I've seen in the low priced VPN/Firewall
appliances.

Initially we where connecting to the Zywall using FreeSWAN, SSH sentinal,
and Windows XP VPN. All of these software packages, when connecting to
the Zywall were difficult to setup and all of them had a hard time
keeping the tunnel up.

We have now moved on to the D-LINKs and the Netgear appliances. The D-LINK
was very easy to setup and connect to the Zywall. It keeps the tunnel
up OK. I didn't spend too much time in the firewall portion but it seemed
to be about the same as most residential FW appliances.

The Netgear is very similar to the D-Link but found it a tad more difficult
to configure. However, the Netgear is maybe a little more feature rich than
the D-LINK. I also think the Netgear FW is maybe a little better than the
D-Link but less than the Zywall. In fact, it may be that the Netgear uses
the same embedded OS as the Zywall. The nice thing about the Netgears is
I can pick them up for very cheap on Ebay.

All in all, if you want a simple VPN that is easy to set up, I would
recommend the D-LINK. If you want something more sophisticated with
better FW capabilities, look into the newer Zywalls. However, there is
nothing wrong with the Netgears.

Rob
.

Relevant Pages

  • Re: Point-to-Point VPN HW Vendor Suggestion?
    ... hardware VPN between two locations. ... the Zywall were difficult to setup and all of them had a hard time keeping the tunnel up. ... I also think the Netgear FW is maybe a little better than the D-Link but less than the Zywall. ...
    (comp.dcom.vpn)
  • Re: Need To See All PCs/Notebook On My LAN
    ... >I have a network setup with a Motorola SB 5100 Cable Modem, then a Netgear ... >to the D-Link router. ... Disable and then enable the notebook's 802.11a network connection. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Need To See All PCs/Notebook On My LAN
    ... connecting through the WAN port. ... >>I have a network setup with a Motorola SB 5100 Cable Modem, then a Netgear ... >>to the D-Link router. ...
    (microsoft.public.windowsxp.network_web)
  • Need To See All PCs/Notebook On My LAN
    ... I have a network setup with a Motorola SB 5100 Cable Modem, then a Netgear ... then I have a D-Link DI-624 connected to ...
    (microsoft.public.windowsxp.network_web)
  • Re: do i need a new router
    ... and Netgear or D-Link would be font form ... My experiences with Netgear products has also left me with a high ... Dynalink, D-link also. ... on stub networks using PPPOE. ...
    (comp.security.firewalls)
Loading