Re: VPN to VPN using Linksys BEFVP41 cannot see network subnets
- From: "Yves Leclerc" <yleclercNOSPAM@xxxxxxxxxxxx>
- Date: Wed, 28 Sep 2005 14:59:02 -0400
I believe you need the netbios Broascast (on the BEFVP41s) to be checked on.
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=356&p_created=1084209755&p_sid=VPODEIQh&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MSZwX3Byb2RzPTE3NiwxODUsMCZwX2NhdHM9JnBfcHY9Mi4xODU7My51MCZwX2N2PSZwX3NlYXJjaF90eXBlPWFuc3dlcnMuc2VhcmNoX25sJnBfc2NmX2xhbmc9MSZwX3BhZ2U9MSZwX3NlYXJjaF90ZXh0PW5ldGJpb3M*&p_li=&p_topview=1
"pitc" <venture@xxxxxxxxxxxx> wrote in message
news:1127864595.344857.315360@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>I set up the vpn router to vpn router like the Linksys says to do. I
> had to make one site a static IP, so I went and bought that extra
> service. The remote site is dynamic IP. But when I connect using the
> remote site router VPN connect I get a connect indication and the log
> file says success, but when I go to use network places etc I cannot see
> the other site. I set up the sites to have different subnets, and
> checked off the netbios enabler. What else should I check? What is a
> different way to connect?
>
.
- Follow-Ups:
- Re: VPN to VPN using Linksys BEFVP41 cannot see network subnets
- From: Martin Bodenstedt
- Re: VPN to VPN using Linksys BEFVP41 cannot see network subnets
- References:
- Prev by Date: vpn go up only pinging
- Next by Date: Re: VPN blocks local network
- Previous by thread: VPN to VPN using Linksys BEFVP41 cannot see network subnets
- Next by thread: Re: VPN to VPN using Linksys BEFVP41 cannot see network subnets
- Index(es):
Relevant Pages
|
|
