[SoHo] Sharing one line for fax and voice?

Hi

We currently have two landlines, one totally unbundled (ie.
voice is VoIP on an ADSL line), and the other is a regular analog
line, just to receive faxes.

Since we receive very few faxes these days, we'd like to close the
second line, and receive faxes on the ADSL line.

Are there some kind of boxes to plug on an RJ11 with two outgoing RJ11
plugs, that can tell if an incoming call is voice or fax, and direct
the call to the ad hoc plug, either a handset or a fax-modem?

Thank you.
.

Relevant Pages

  • Re: [SoHo] Sharing one line for fax and voice?
    ... and receive faxes on the ADSL line. ... Are there some kind of boxes to plug on an RJ11 with two outgoing RJ11 ... plugs, that can tell if an incoming call is voice or fax, and direct ...
    (comp.dcom.telecom.tech)
  • Re: receiving faxes silently and voice/fax detection
    ... The MP780 will store incoming faxes in memory only when the ... You can set the MP780 to not ring the phone connected to it. ... How does it make the determination it is a voice call? ...
    (comp.dcom.telecom.tech)
  • Re: receiving faxes silently and voice/fax detection
    ... The MP780 will store incoming faxes in memory only when the ... The MP780 will answer every call itself and, if it determines that it is a voice call, the MP780 itself will ring. ...
    (comp.dcom.telecom.tech)
  • Re: dial-up ADSL modem
    ... 64Kbit/sec digital channels through the voice network. ... ADSL works, by taking advantage of the characteristics ... allows the DSLAM to be connected at a location ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: Problem sending faxes through VoIP
    ... sh call active voice brief ... codec and when is compresed on cisco faxes has so many problems. ... I figure out that the cisco router is working only as data gateway not ... The VoIP card is configured by a provider, ...
    (comp.dcom.sys.cisco)