Re: Nortel BCM 1000 to 1000e expansion chassis cable

The NTAK cable on ebay has 50 pin Amphenol connectors on each end, not
RJ45 connectors and is therefore not the correct cable.

How can I confirm that the NTAB3304 cable I'm purchasing is the correct
RJ45 cable and not the D connector version. Anyone able to point me to
a supplier in either UK (preferably) or US , that is supplying the RJ45
version with correct description.If in US I can get a friend to
purchase it for me and send over.

Thanks again

Bullfrog



bdalida wrote:
Bullfrog wrote:
Hi

Apparently it is important when connecting a BCM 1000 or BCM400 to a 6
bay expansion chassis, that the official 5 metre cat5 cable is
used.Apparently a standard one may give problems.

This is the cable that links the 2 RJ45 DS256 ports together.

I'm having trouble locating this cable - the only part number I can
find vaguely related is a NTAB3304 cable, but various internet
suppliers describe this as being a V24 DS256 cable with a D type
connection. So is evidently incorrect.

Can anyone tell me the correct Nortel part number for the cable I seek?

I could also do with tracking down the 50pin Amphenol type cable that
connects the media bays to the outside world.

Thanks very much

Bullfrog

NTAB3304 = BCM DS256 Cable 5M. That is the correct part number from
Nortel for the cable you are looking for. FYI.



.

Relevant Pages

  • Re: Current rating of an RJ45 connection
    ... Note that the maximum recommended current (for power conduction) per ... through an RJ45 as in PoE but not using 802.3af power control. ... the power connectors were becoming intermittent. ...
    (sci.electronics.design)
  • Re: Current rating of an RJ45 connection
    ... Note that the maximum recommended current (for power conduction) per ... through an RJ45 as in PoE but not using 802.3af power control. ... the power connectors were becoming intermittent. ...
    (sci.electronics.design)
  • Re: Radio Shack?
    ... Do you even know what a REAL RJ45 is? ... The connectors are actually ... 8P8C modular plugs and jacks. ... industry standard for telephone wiring, ...
    (sci.electronics)
  • Re: Anyone Make a 8-pin Mike Plug to 8-pin Modular Jack?
    ... I made an adapter today using Radio Shack RJ45 ... connectors and 8-pin mike plug with a short piece of CAT5 cable. ...
    (rec.radio.amateur.equipment)