Re: Help! AD3 and win2k / IIS 5

Of course it makes sense that you can't know without the proper
documentation--but I was hoping someone had a similar problem over
different servers. The network and alteon configurations are
identical--all I need to do is move the RIP to the 2003 servers, and
the LB works. This leads me to believe that there may be something on
the 2k servers, but we've tried this with three servers, and get the
same result. All servers are connected to the same L2 switch,
connected to the LB.

Y
Dophi wrote:
For your configuraiton, you can change the health check to TCP for
group 2 becasue the HTTP content is not sepcified. Except it, nobody
can know why it doesn't work without topology and data flow fo two
servers.


mickey wrote:
Hello

I've a strange situation. i have an AD3 with win2k servers behind it.
I also have win2003 servers. Here is the problem: with the win2k
servers, the load balanced VIP does not respond! If I turn off the
win2k servers and assign the real IPs to the win2003 servers, it works
grandly. I've gone through all configurations, but can't figure it
out! The servers respond when connecting to the RIP, and the load
balancer http health check seems Ok as well.

Anyone have any ideas?! Here are some configs on groups/reals/virts.
/c/slb/real 1
ena
rip 128.241.232.26
/c/slb/real 2
ena
rip 128.241.232.27
/c/slb/real 3
ena
rip 10.0.1.24
backup 4
/c/slb/real 4
ena
rip 10.0.2.24
/c/slb/real 5
ena
rip 10.0.5.80
backup 6
/c/slb/real 6
ena
rip 10.0.6.80
/c/slb/group 1
metric minmisses
health http
content "load_balancer.cfm"
add 1
add 2
/c/slb/group 2
health http
add 3
/c/slb/group 3
health icmp
add 5
/c/slb/port 1
client ena
server ena
/c/slb/port 2
client ena
server ena
/c/slb/port 3
client ena
server ena
/c/slb/port 4
client ena
server ena
/c/slb/virt 1
ena
vip 128.241.232.25
/c/slb/virt 1/service http
group 1
/c/slb/virt 2
ena
vip 128.241.232.24
/c/slb/virt 2/service http
group 2
/c/slb/virt 3
ena
vip 128.241.232.80
/c/slb/virt 3/service http
group 3
/c/slb/virt 3/service https
group 3
/c/slb/virt 3/service ftp
group 3
/


thanks! This may be worth a beer :)

Y

.

Relevant Pages

  • Re: Help! AD3 and win2k / IIS 5
    ... But I am a still a little confused about submac. ... The LB showed both win2k servers as 'up'. ... The servers respond when connecting to the RIP, ...
    (comp.dcom.sys.nortel)
  • Help! AD3 and win2k / IIS 5
    ... i have an AD3 with win2k servers behind it. ... I also have win2003 servers. ... The servers respond when connecting to the RIP, ...
    (comp.dcom.sys.nortel)
  • Re: Help! AD3 and win2k / IIS 5
    ... and double check the services loaded on the win2k servers. ... The servers respond when connecting to the RIP, ...
    (comp.dcom.sys.nortel)
  • Re: Help! AD3 and win2k / IIS 5
    ... i have an AD3 with win2k servers behind it. ... The servers respond when connecting to the RIP, ... balancer http health check seems Ok as well. ...
    (comp.dcom.sys.nortel)
  • Re: Help! AD3 and win2k / IIS 5
    ... The default gateway of that server is set to router. ... destination IP from VIP to RIP. ... The LB showed both win2k servers as 'up'. ...
    (comp.dcom.sys.nortel)