I've got a 460 24T PWR Switch that I have connected via fiber to the
netowrk. I can ping the switch from a machine on my network as well as
access the web interface.
If I plug a computer directly into the switch using copper ethernet,
the link light does not come up and I am not connected. Is there
something that needs to change or something that needs to be enabled so
that these ports work?
I have them all enabled to autonegotiate. Any ideas?
RE: IP address conflicts ... If you get a network vendor like Network Hardware Resale ... >> It's amazing how money will appear out of thin air if certain oxen get ... the switch you are suggesting I cannibalise uses the EtherToken ... When dealing with a bureaucracy I have found the most effective method is ... (freebsd-questions)
Re: ConnectComputer Problem ... I'm a little confused by your network configuration.... Switch2 --- SBS Server...switch has internet access all the time, the second switch has the client ...NICs... (microsoft.public.windows.server.sbs)
Re: Help with long term network problem ... Using a CNET network switch connected to a CNet Wireless G router Model ... Having the chart listing all of the computers is a great start. ... /all" shows only an Intel 2200BG WiFi connection - no Ethernet is apparent. ... (microsoft.public.windowsxp.network_web)
Re: LAN ip subnet is moving off from a bigger enterprise ... The host company runs Cisco ... Connect your switch to this ... At the CBO the network is 10.23.1.x and the gateway ...WS1 WS3 SBS HP4000 ... (microsoft.public.windows.server.sbs)
Re: Problem with computer network dropping connection ... I have run ping tests against the computer ... Still seeing> 15% packet loss over an 8 hour ... You might try replacing the network card (if the NIC is on the ... So now I'm thinking that the switch cache is getting messed up. ... (comp.os.linux.networking)
