Re: Two 3825s won't talk to each other

From: Trendkill <jpmason@xxxxxxxxx>
Date: Thu, 10 Jul 2008 08:03:30 -0700 (PDT)

On Jul 10, 10:49 am, "BigDaveKe...@xxxxxxxxxxxxxx"
<BigDaveKe...@xxxxxxxxxxxxxx> wrote:

Oops, finger malfunction. Obviously remove the sh in g0/0/0 from the
middle of the controllers output!

The 'type none' in this:

Interface GigabitEthernet0/0/0 (idb 0x635718CC)
network link is down, loopback is not set, type none, i/f is not
throttled

is still worrying me. That should say something about rj45 or
something from my experience. I don't have a 3825 with that same
module, but I am looking at a 3845 with its onboard nics, and it
definitely says type rj45. Hopefully someone else on these boards can
pinpoint what we are missing, but its something simple at layer 1 or a
base config line I would suspect.
.

Follow-Ups:
- Re: Two 3825s won't talk to each other
  - From: BigDaveKelly@xxxxxxxxxxxxxx

References:
- Two 3825s won't talk to each other
  - From: BigDaveKelly@xxxxxxxxxxxxxx
- Re: Two 3825s won't talk to each other
  - From: Trendkill
- Re: Two 3825s won't talk to each other
  - From: BigDaveKelly@xxxxxxxxxxxxxx
- Re: Two 3825s won't talk to each other
  - From: Trendkill
- Re: Two 3825s won't talk to each other
  - From: BigDaveKelly@xxxxxxxxxxxxxx
- Re: Two 3825s won't talk to each other
  - From: Trendkill
- Re: Two 3825s won't talk to each other
  - From: BigDaveKelly@xxxxxxxxxxxxxx
- Re: Two 3825s won't talk to each other
  - From: Trendkill
- Re: Two 3825s won't talk to each other
  - From: Trendkill
- Re: Two 3825s won't talk to each other
  - From: BigDaveKelly@xxxxxxxxxxxxxx
- Re: Two 3825s won't talk to each other
  - From: BigDaveKelly@xxxxxxxxxxxxxx

Prev by Date: Re: Two 3825s won't talk to each other
Next by Date: Re: Two 3825s won't talk to each other
Previous by thread: Re: Two 3825s won't talk to each other
Next by thread: Re: Two 3825s won't talk to each other
Index(es):
- Date
- Thread