Re: Changing IPs

On Fri, 30 May 2008 01:21:47 -0700, Merv <merv.hrabi@xxxxxxxxxx> wrote:

On May 29, 8:50 pm, "Tom Linden" <t...@xxxxxxxxxxxxxx> wrote:
On Thu, 29 May 2008 17:39:52 -0700, Merv <merv.hr...@xxxxxxxxxx> wrote:

> what is the toplogy ?

> default is pointed at the T1 next-hop and the description for fa 0/0
> is outside interface to Internet

> Usually default would point at the Internet ...

I have not put this into service obviously, the T1 line won't be live
until tomorrow
Topology, pretty simple f0/0 handles routable devices and f0/1
non-routable NATed by
the router. I was trying to set it up beforehand and thought I would test
the config
by seeing if I could ping the interfaces, I thought even though S0/0 was
down, I should
be able to ping my end of the line.


the interface has to be in up and up state.

For serial interfaces the ping is actually sent to far side and back


So does the state of the serial line only change from down to up when the
line goes live?

One other odd thing in the stuff I got from ATT yesterday, they gave me my IPs
as 1-127 block, but they specified F0/0 to be 129 in that C class. How can that
be?




--
PL/I for OpenVMS
www.kednos.com
.

Relevant Pages

  • Re: AD, DHCP or maybe DNS problem?
    ... the Basic Firewal (In the internal Interface or in the Public Interface)? ... RRAS firewall enabled I have the problem, If i remove the basic firewall ... but can't use the internet on) below are my pings ... Ping statistics for 127.0.0.1: ...
    (microsoft.public.windows.server.active_directory)
  • Re: Problem configuring NAT to share Internet Connection
    ... One of my NICs in the server connect to a DSL ... modem and it connects to internet. ... > interface, that connects to the DSL modem, LAN interface, that connects to ... >> 7.- To connect server to Internet, I create a new network connection. ...
    (microsoft.public.win2000.ras_routing)
  • Internet thru Cisco 871
    ... SDM wizards and didn't get the internet. ... expected static IP address on the Dialer0 interface but fail ping ... zone security private ... ip http access-class 3 ...
    (comp.dcom.sys.cisco)
  • Re: Problem configuring NAT to share Internet Connection
    ... This is the IPCONFIG information of the server (where you can see Internet ... interface, that connects to the DSL modem, LAN interface, that connects to ... > 7.- To connect server to Internet, I create a new network connection. ...
    (microsoft.public.win2000.ras_routing)
  • Re: How to read an XML file in Visual C++ 6
    ... I am against it when it actively interferes with my productivity ... I use remote desktop extensively, particularly in the summer, so I can work on all my ... Web mail interface comes ahead of my filters and I get the "raw" messages, ... I have no idea of the quality of the throughput band of your Internet ...
    (microsoft.public.vc.mfc)