Re: Changing IPs


what is the toplogy ?

default is pointed at the T1 next-hop and the description for fa 0/0
is outside interface to Internet

Usually default would point at the Internet ...
.

Relevant Pages

  • Re: Problem configuring NAT to share Internet Connection
    ... One of my NICs in the server connect to a DSL ... modem and it connects to internet. ... > interface, that connects to the DSL modem, LAN interface, that connects to ... >> 7.- To connect server to Internet, I create a new network connection. ...
    (microsoft.public.win2000.ras_routing)
  • Internet thru Cisco 871
    ... SDM wizards and didn't get the internet. ... expected static IP address on the Dialer0 interface but fail ping ... zone security private ... ip http access-class 3 ...
    (comp.dcom.sys.cisco)
  • Re: Problem configuring NAT to share Internet Connection
    ... This is the IPCONFIG information of the server (where you can see Internet ... interface, that connects to the DSL modem, LAN interface, that connects to ... > 7.- To connect server to Internet, I create a new network connection. ...
    (microsoft.public.win2000.ras_routing)
  • Re: Access from internal hosts to internal servers using external address
    ... I have a Cisco 386 in a NAT configuration. ... Internal hosts can access the Internet in a NAT'ed fashion ... interface Ethernet0 ...
    (comp.dcom.sys.cisco)
  • Re: T1 lines go mad
    ... > Can you post the interface configs as well as a show interface for each end? ... Current configuration: 137 bytes ... Internet address is 192.168.245.1/30 ... output buffer failures, ...
    (comp.dcom.sys.cisco)