Re: Re-establishing VPN connection when ISP forces new IP address

Thanks for all of your suggestions. We found a solution to our
problem. We setup both Syslog logging and NTP to sync with servers on
our VPN-only accessible network, thus forcing the router to re-
establish the VPN tunnel if only to sync with the NTP server and
deliver logging messages. We are also running a 'kron' a few times a
day to ensure the tunnel stays up.

-Thomas
.

Relevant Pages

  • Re: handling falseticker
    ... This would lead to a "lost sync" or a "sync to ... recognized by the clients and this NTP path will be ignored. ... Both Stratum 1 will keep being sync with the respective Stratum 0 because ... This means that my Stratum 2 Servers have only 2 servers. ...
    (comp.protocols.time.ntp)
  • Re: Cant time sync with Windows 2003 Server Std.
    ... but would the router block outgoing connections? ... Any other oddities that 2K3R2 Server may need to have NTP sync work? ... I've tried several NTP servers in this box with no success. ...
    (microsoft.public.windows.server.general)
  • NTP Rule for DC doesnt work
    ... I'm trying to get my win2003 dc to sync with an external time source. ... the other servers are set to nt5ds, ... The dc resolves the address of the ntp server but can't connect. ...
    (microsoft.public.isa.configuration)
  • Re: Re-establishing VPN connection when ISP forces new IP address
    ... We setup both Syslog logging and NTP to sync with servers on ...
    (comp.dcom.sys.cisco)
  • Re: Setting Up NTP Subnet
    ... > I have questions regarding best practices on architecture of NTP ... > it sufficient to use multiple GPS receivers with ACTS dial ... The lower the stratum the bigger the ... servers and that the servers at this level should peer. ...
    (comp.protocols.time.ntp)