Dinosaurs won't route

You guys, I hate having to ask something so simple, but I"m stuck. I
was away from the old Cisco access routers for a couple of years, and
now all of a sudden I'm needing to use existing equipment to set up
very simple routing tasks -- a local LAN and a gateway router, nothing
more.

I have configured a 4500, a 2621 and a 2514 and at times I get them to
route from PCs on the LAN, out to the Internet but when I do get it
it's dumb luck. A 2514 and a 2621 for just in case, were working
great in my lab and when I took them to the client they just by God
would not route. With everybody watching over my shoulder wouldn't
you know.... Testing everything in sight, it is clear that is it my
configuration that's wrong, and I do not know where the problem is.
Has to be simple.

May I please post this 2514 sh ru and ask if someone would look at it
-- I think the problem will probably just leap out at somebody who is
fresh with this stuff.

Thanks Guys,

Bob W

***********************************************sh
ru*****************************************
ya-raheem#sh ru

Building configuration...

Current configuration:
!
version 11.1
service udp-small-servers
service tcp-small-servers
!
hostname ya-raheem
!
enable secret 5 $1$YOuB$SaUwSA6QAcU3JwtG66NT60
enable password cisco
!
!
interface Ethernet0
ip address 200.200.200.1 255.255.255.0
!
interface Ethernet1
ip address 192.168.0.79 255.255.255.0
!
interface Serial0
no ip address
shutdown
!
interface Serial1
no ip address
shutdown
!
router rip
version 2
network 200.200.200.0
network 192.168.0.0
no auto-summary
!
ip default-gateway 192.168.0.1
ip name-server 4.2.2.2
ip name-server 128.32.206.9
no ip classless
ip route 0.0.0.0 0.0.0.0 Ethernet1
logging buffered
!
line con 0
line aux 0
line vty 0 4
password hamudi10
login
!
end

*************************************sh ip
int***************************************************
ya-raheem#sh ip int

Ethernet0 is up, line protocol is up
Internet address is 200.200.200.1/24
Broadcast address is 255.255.255.255
Address determined by non-volatile memory
MTU is 1500 bytes
Helper address is not set
Directed broadcast forwarding is enabled
Multicast reserved groups joined: 224.0.0.9
Outgoing access list is not set
Inbound access list is not set
Proxy ARP is enabled
Security level is default
Split horizon is enabled
ICMP redirects are always sent
ICMP unreachables are always sent
ICMP mask replies are never sent
IP fast switching is enabled
IP fast switching on the same interface is disabled
IP multicast fast switching is enabled
Router Discovery is disabled
IP output packet accounting is disabled
IP access violation accounting is disabled
TCP/IP header compression is disabled
Probe proxy name replies are disabled
Gateway Discovery is disabled
Policy routing is disabled
Ethernet1 is up, line protocol is up
Internet address is 192.168.0.79/24
Broadcast address is 255.255.255.255
Address determined by setup command
MTU is 1500 bytes
Helper address is not set
Directed broadcast forwarding is enabled
Multicast reserved groups joined: 224.0.0.9
Outgoing access list is not set
Inbound access list is not set
Proxy ARP is enabled
Security level is default
Split horizon is enabled
ICMP redirects are always sent
ICMP unreachables are always sent
ICMP mask replies are never sent
IP fast switching is enabled
IP fast switching on the same interface is disabled
IP multicast fast switching is enabled
Router Discovery is disabled
IP output packet accounting is disabled
IP access violation accounting is disabled
TCP/IP header compression is disabled
Probe proxy name replies are disabled
Gateway Discovery is disabled
Policy routing is disabled
Serial0 is administratively down, line protocol is down
Internet protocol processing disabled
Serial1 is administratively down, line protocol is down
Internet protocol processing disabled
.

Relevant Pages

  • 2503/WS-1103 intermittant ping
    ... I installed a 2503/WS-1103 which is a catalyst 3200 with a router ... blade installed on my network. ... BRI0 is administratively down, line protocol is down ... IP fast switching on the same interface is disabled ...
    (comp.dcom.sys.cisco)
  • RE: VPN to SBS through Comcast router
    ... The only thing I can find is to open TCP/UDP port 47 ... "What's GRE?". ... >> workaround for the hardware router which is not supporting PPTP connection. ... GRE is a client protocol of IP ...
    (microsoft.public.windows.server.sbs)
  • Re: What provides default router via DHCP?
    ... >> same thing can be done better using RIP. ... I'd also note that IPv6 has a similar router discovery mechanism. ... protocol and without substantial changes. ... if you run DHCP as a client on Solaris and the DHCP ...
    (comp.unix.admin)
  • Re: How do I stop my PC from returning a "Ping"?
    ... to send out packets and retrieve the incoming replies as well. ... I would bet that he is behind a router, the router is getting the IP ... The router probably can be set up to disable ICMP ... >> Hmmm, but "ping of death" attacks could be pretty major, should they ...
    (microsoft.public.windowsxp.security_admin)
  • Re: Help - Tried almost everything!
    ... In the previous message I gave you a link to Google, ... I've spent hours searching ... > still have no answer why the ICMP still goes out every ... >>>>Hosts send ICMP Router Solicitation messages to the all ...
    (microsoft.public.security)