Re: asa 5505 not nat problem

From: richard@xxxxxxxxxxxxxxxxxxxxxxxxxx (richard pijlgroms)
Date: Thu, 27 Mar 2008 23:47:28 +0100

richard pijlgroms <richard@xxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:

1 strange behauvior: we opened up the telnet on the outside interface
but we get connected but no login string.

asdm works perfect, we can manage only from outside.
.

References:
- asa 5505 not nat problem
  - From: richard pijlgroms

Prev by Date: Re: Advise on MPLS Providor
Next by Date: Re: PCI System Error Exception
Previous by thread: asa 5505 not nat problem
Next by thread: Port Aggregation NM-4E
Index(es):
- Date
- Thread

Relevant Pages

Re: ASA 5505 ASDM Startup Wizard - does it work at all?
... ASDM is too difficult for me. ... Select from the menu: Wizards - Startup Wizard ... Interface vlan1 ... followed by an error message "ASDM is unable to contact the ASA" and ...
(comp.dcom.sys.cisco)
Re: telnet problem / ping ok
... If you are able to initiate a successful telnet to the 1760 from within ... problem with the telnet connection to the Cisco 1760 behind the Cisco ... interface FastEthernet0/0 ...
(comp.dcom.sys.cisco)
Re: Phantom telnet connections
... Do you see actual connections on there, ... a QIO interface for management as well as an ... actually built against a 7.2-2 build environment (I know, ... a SHOW SYS indicates only 17 users are logged in with telnet. ...
(comp.os.vms)
RE: Cisco IOS question
... I believe that telnet and ssh are run all or none deals. ... this is they are not running on 1 interface per say (well you actually ... LAUNCH - Your Yahoo! ...
(Security-Basics)
Re: PIX 506 forwarding telnet port to home lab UPDATE
... open the telnet port to allow access to my home ... access-list 101 line 1 permit tcp any interface outside eq telnet ... access-group 101 in interface outside ...
(comp.dcom.sys.cisco)