Re: Cisco Catalyst 2900

Hi Dave,

I am a newbie have inherited a Catalyst 2900. It seems to have two
fiber ports on it; ports 23 & 24. Is there a way to determine if
these are 1GB ports? Is there anything slower? I do a 'sh ru' and it
lists these ports as Fastethernet 0/23 and 0/24.

For all Ethernet based ports, Cisco devices display ports as -
Ethernet = 10Mb
FastEtehrent = 100Mb
Gigabit = 1000Mb
This is regardless of MEDIA type for that interface.

Exactly what TYPE of 2900 series (there are hundreds of different 2900
models) device is this. This can be obtained by posting the ouput from

dis ver (Display Version of IOS)
this tells us a lot about the S/W and some info about the H/W of this
device
and also
sh ip int br (Show ip interface brief)
This command gives an abbreviated list of available interfaces (both
physical and logical) on that device.

Cheers..........pk.


--
Peter from Auckland.
.

Relevant Pages

  • Re: Publish Web Server behind SBS 2003 Standard
    ... Microsoft CSS Online Newsgroup Support ... When opening a new thread via the web interface, ... |> Method 2: Different ports ... |> "Network Connection". ...
    (microsoft.public.windows.server.sbs)
  • Re: [PATCH] Dynamic port labeling V2
    ... the selinuxfs interface to portcon and changed the interface to only ... don't have to be authorized to reload the full policy. ... strange labeling states when changing a set of ports to a new label. ... It seems most reliable to add the entire set of portcons every time, that way the ordering is always exactly like it is in the file and there is a persistent file on disk that can be loaded at policy load time. ...
    (Linux-Kernel)
  • Re: [PATCH] Dynamic port labeling V2
    ... the selinuxfs interface to portcon and changed the interface to only ... don't have to be authorized to reload the full policy. ... strange labeling states when changing a set of ports to a new label. ... It seems most reliable to add the entire set of portcons every ...
    (Linux-Kernel)
  • Re: my future telephones [telecom]
    ... The short answer to the cost question is that I spent way too much ... I decided to use my existing Cisco routers for POTS ports since I was ... already familiar with the management interface. ... router comes back up. ...
    (comp.dcom.telecom)
  • Re: [PATCH] Dynamic port labeling V2
    ... the selinuxfs interface to portcon and changed the interface to only ... Added a mechanism to add/delete/update port labels with an interface in ... strange labeling states when changing a set of ports to a new label. ...
    (Linux-Kernel)