PIX 501 VPN

This is a new install, I'm running PIX 501 6.3(5) and I'm trying to VPN in
with the Windows XP client. I'm able to connect to the PIX but I can't see
the inside network even if I try to ping I get no response. Can someone
tell me what I might be missing or provide an example on how to setup
Windows XP and the PIX 501 so I can VPN.

I configured VPN using the PIX PDM then I went to the CLI and enter these
commands.

fixup protocol pptp 1723
sysopt connection permit-pptp


Thanks.

Russ


.

Relevant Pages

  • Re: [fw-wiz] Pix VPN endpoint and split-tunnel
    ... >>I am trying to configure a cisco pix as a vpn endpoint for the cisco vpn ... >>would like to force the client to use the corporate network for internet ... >of anything the PIX or VPN client do. ...
    (Firewall-Wizards)
  • Re: VPN problems
    ... in my company connect using the vpn to a pix without issues. ... I know the client is connected, ... tried to connect to a variety of IP addresses and ports on the VPN ... played with the firewall on xp, even turning it off with no luck. ...
    (comp.dcom.sys.cisco)
  • VPN with PIX 501
    ... I'm trying to set up a simple VPN using PIX 501 firewall and Cisco VPN ... client to access a Win 2003 server in the internal network. ... I managed to get it up-and-running and found the client for it, ...
    (comp.dcom.sys.cisco)
  • Re: Cisco VPN client connecting trough ISA 2004 - problem
    ... If you use the PDM to configure your PIX then there is a tick ... Clients are Cisco VPN 4.6 connecting to PIX IOS 6.3. ... My problem is that clients connectig from network behing ISA 2004 which i ... VPN client. ...
    (microsoft.public.isa.vpn)
  • Re: [fw-wiz] Pix VPN endpoint and split-tunnel
    ... >> I am trying to configure a cisco pix as a vpn endpoint for the ... >> would like to force the client to use the corporate network for ... create static route to remote gateway ...
    (Firewall-Wizards)