Re: Configuring Tekelec - TE820A DS1 Frame Simulator-Analyzer for Serial Port Operation

Post the router config and maybe someone can help you. "cannot get it to
function" is not very helpful to try and help you. What diagnostics have
your run? What does a "show int" say?

"Xatanz" <netengr@xxxxxxxxxxx> wrote in message
news:13nik5sp9a3io1b@xxxxxxxxxxxxxxxxxxxxx
Need help configuring a Tekelec, TE820A DS1 Frame Simulator-Analyzer to
connect to a standard 2500 serial port. I have the Option 03, card in the
TE820A which provides a V.35 interface with the TE820A serving as DCE. I
have connected this to a 2500 serial port but cannot get it to function.

Any advice on connecting this piece of equipment to a serial interface
will
be greatly appreciated.

Thanks....




.

Relevant Pages

  • Configuring Tekelec - TE820A DS1 Frame Simulator-Analyzer for Serial Port Operation
    ... card in the ... have connected this to a 2500 serial port but cannot get it to function. ... Any advice on connecting this piece of equipment to a serial interface will ...
    (comp.dcom.sys.cisco)
  • Re: UK-biased question about GPS
    ... However the Magellans have some contacts in the battery compartment which are actually connected to a serial port: ... But if you are knowledgeable enough to be curious as to how you can connect to or use the NMEA capability, the word NMEA is not even mentioned in the online user's manual. ... Nor does it come with a cable for connecting to any kind of port nor are any cables offered as an accessory. ...
    (sci.geo.satellite-nav)
  • Help with Digi PortServer TS under AIX???
    ... network and ultimately connects to a Tandem host computer. ... When we sent a message to the assigned tty port the remote Tandem host ... SEND the message out the serial port, ... If anyone has had any experience connecting with this type of device ...
    (comp.unix.aix)
  • Re: Pick R83 serial connection (newbie)
    ... He has an R83 hard drive and a 386 with a serial port. ... seeing the serial port to give him a logon. ... anyone think it's possible to do a partition copy to another hd, ... If you are connecting two computers, one with pick and the other with a PC ...
    (comp.databases.pick)
  • Re: Getting a IIgs to play nice with a Mac
    ... because I don't have an apple to apple cable. ... PC standard serial port, and connecting the two of them directly ... swapping over the outer pins of the third row ...
    (comp.sys.apple2)