Re: Secondary PIX

If you are using the failover cable:

Power on the secondary unit (with a clean configuration) and enable failover
on the unit if it is not already enabled:

hostname(config)# failover

The active unit sends the configuration in running memory to the standby
unit. As the configuration
synchronizes, the messages "Beginning configuration replication: sending to
mate" and "End
Configuration Replication to mate" appear on the primary console.

Check your failover status:

hostname# show failover

--

===========
Scott Perry
===========
Indianapolis, Indiana
________________________________________
"saffio" <javzone@xxxxxxxxx> wrote in message
news:91bebf63-8b92-4f9e-bcbb-0cf1a53763a7@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hello folks,

I am new to PIX technology...we have stateful failover
configured(515E)...recently the secondary PIX brokedown..and cisco has
shippedpout a replacement unit...I would like to know
as the minimum config I have to do to make it sync with the Primary
PIX..Primary has Unrestricted and Secondary has Failover
License...your help is appriciated.

Thanks in advance!
cheers


.

Relevant Pages

  • Re: [SLE] Looking for a book that describes highly available DHCP setups
    ... I'm looking for a book that explains reliable and manageable DHCP setups. ... it should cover installations with failover and load balancing configurations of dhcpd. ... Without such a second server, all clients would not work any more after the lease expired. ... I'm not interested in technology explanation and configuration examples. ...
    (SuSE)
  • Re: updating to 2003
    ... > i'm faced with the task of updating windows 2000 advanced server ... > (with 2 active directory/fileservers clustered together in failover ... > configuration). ...
    (microsoft.public.win2000.networking)
  • RE: Cluster Configurations
    ... if I may ask will those the following configuration seem ... Default Instance -> Failover to Node 4 ... Named Instance -> Failover to Node 4 ... -> Set to Fail Over to Node 3 ...
    (microsoft.public.sqlserver.clustering)
  • Re: CISCO ASA 5505 Failover
    ... I ended up setting the seconday back to the factory default settings ... I then uploaded the configuration from the primary ... I set the failover to be secondary (failover lan ... You can use any unused Ethernet interface on the device as the ...
    (comp.dcom.sys.cisco)
  • Rebuild the secondary PIX firewall
    ... Could some one help/ suggest as to how I can go about reconfiguring ... the secondary PIX Fw. ... We have a LAN based failover as of now we have just the ...
    (comp.dcom.sys.cisco)