Re: Cisco 2948G-L3 Configuration Question

On Nov 29, 1:47 pm, tman <naves....@xxxxxxxxx> wrote:
On Nov 29, 12:02 pm, Trendkill <jpma...@xxxxxxxxx> wrote:





On Nov 29, 2:33 pm, tman <naves....@xxxxxxxxx> wrote:

On Nov 29, 9:53 am, Trendkill <jpma...@xxxxxxxxx> wrote:

On Nov 29, 12:02 pm, tman <naves....@xxxxxxxxx> wrote:

We use a Cisco 2948G-L3 as our backbone. I purchased another one as a
spare. I wanted to try loading the configuration file via tftp server
on the spare. The configuration file loaded just fine but I found
that non of the 48 10/100 ports were up. I had to go to any port I
wanted to use and do a no shut.

Is this normal? If so, is there a way to no shut all the ports at the
same time?

Thanks

If the ios will support the range command, the answer is yes. Not
sure on the 2948s, all comes down to how modern the code is.

int range fastethernet (or gigabitethernet) 0/1 - 48
no shut

Shouldn't the configuration that I uploaded from the tftp server do a
no shut on all the ports? It was a running-configuration from the
other 2948G-L3.

Thanks

"No shut" doesn't show in the running or startup config text, and you
probably had a default config of shutdown. Not sure how to change
that on an IOS switch, but I'm sure there is a way. Else range works
great.- Hide quoted text -

- Show quoted text -

There is no range command in this version of IOS.- Hide quoted text -

- Show quoted text -


I guess the real question is if the configuration on our production
2948G-L3 boots and all the ports are not in a shutdown state, why,
when I download the same configuration to my spare 2948G all the
interfaces in a shutdown state?

Thanks
.

Relevant Pages

  • Re: How to make HD bootable?
    ... configuration. ... > What I ended up doing is putting in a spare hd and making it master - then ... > Terry in Atlanta ...
    (microsoft.public.win2000.general)
  • Re: N+1 Configuration Clustering Question
    ... what you have described is a typical N+1 configuration. ... > We also have a spare node SPARE ... > It it possible to configure it so that any one of the Resource Groups ...
    (microsoft.public.windows.server.clustering)
  • Re: Raid configuration advice
    ... I kind of like Kevin's suggestion as far as the RAID5 configuration. ... channel in a RAID5 array with a hot spare. ... What is the recommended Raid configuration and partitions. ...
    (microsoft.public.windows.server.sbs)
  • Re: Cisco 2948G-L3 Configuration Question
    ... I wanted to try loading the configuration file via tftp server ... on the spare. ...
    (comp.dcom.sys.cisco)
  • Re: N+1 Configuration Clustering Question
    ... So if you can't actually block two nodes from failing over to the spare. ... Huw ... >> I've a question on MSCS and N+1 configuration I was hoping one of you ... >> It it possible to configure it so that any one of the Resource Groups ...
    (microsoft.public.windows.server.clustering)