Re: SDM initial install won't start

On 30 Oct, 12:41, JeroenOss1...@xxxxxxxxx wrote:
On 30 okt, 12:18, "headsetadapter.com" <for-s...@xxxxxxxx> wrote:





Jeroen,

IOS usually expects to see SDM files in the same directory (at least at the
same drive). You have to check if 1841 supports having SDM on another
path/drive (some routers have a way to tell where HTML files are, but some
may be not).

Good luck,

Mike
CCNP, CCDP, CCSP, Cisco Voice, MCSE W2K, MCSE+I, Security+, etc.
CCIE R&S (in progress), CCIE Voice (in progress)
------
Headset Adapters for Cisco IP Phoneswww.ciscoheadsetadapter.comwww.headsetadapter.com

<JeroenOss1...@xxxxxxxxx> wrote in message

news:1193733574.518171.30010@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Hi guys,

I have a cisco 1841 with a HWIC-AP installed and using c1841-
advsecurityk9-mz.124-11.T.bin

After I copied the new bin file to the CF card SDM failed initial
installation. Also with the original CF card the installation doesn't
start.

I receive the 404 Page cannot be found error in IE an Mozilla.

Some things I tried:
- going back to factory defaults
- changing JAVA version from 1.4.2 tot 1.6
- Re-configure HTTP settings including new user with privilege 15

Does anyone have a clue? It seems that I would need a CD-Rom version
to re-install SDM on the router? In that case, I have 2 problems,... I
don't have a Cisco COO account and a previous IT guy took the CD-ROM
with him.

Any help appriciated.

Regards,
Jeroen- Tekst uit oorspronkelijk bericht niet weergeven -

- Tekst uit oorspronkelijk bericht weergeven -

Hi Mike,

All SDM files are located in the root of the same drive that holds
IOS. So on the CF card there are no folders created, all files are in
the root.


I am not sure what access is required but Cisco has
the install files on their web site.

There is a windows Installer and you can choose whether to install
on the PC, a router or both.

There are other files too. Maybe a free registration is enough?



.

Relevant Pages

  • Re: newbie: configuring cisco 2651XM
    ... I also logged in to cisco support but the site said I ... Having a guide for x model router is the same as having a guide ... The things that change are the interfaces, ... SDM on the router? ...
    (comp.dcom.vpn)
  • Re: Lab Demo
    ... You may wish to investigate the Cisco Router and Security Device ... Cisco Router and Security Device Manager is an intuitive, ... SDM provides smart wizards and advanced configuration support for LAN ...
    (comp.dcom.sys.cisco)
  • Re: Cosco ConfigMaker?
    ... The new version of Cisco ConfigMaker V2.6 is actually named Cisco ... Router and Security Device Manager (SDM) and it's free software ... SDM provides smart wizards and advanced configuration support for LAN ...
    (comp.dcom.sys.cisco)
  • Error 1931 with olepro32.dll
    ... I run a Dell 9150 with XP Pro through a Linksys wireless Router via Cisco 675 ... modem on a DSL internet connection. ... During the install of Cisco VPN Client ... OK anyway and the installation continued and indicated that it was installed ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: SDM initial install wont start
    ... IOS usually expects to see SDM files in the same directory (at least at the ... Headset Adapters for Cisco IP Phones ... Also with the original CF card the installation doesn't ... don't have a Cisco COO account and a previous IT guy took the CD-ROM ...
    (comp.dcom.sys.cisco)