Re: SDM initial install won't start
- From: "headsetadapter.com" <for-spam@xxxxxxxx>
- Date: Tue, 30 Oct 2007 07:18:17 -0400
Jeroen,
IOS usually expects to see SDM files in the same directory (at least at the
same drive). You have to check if 1841 supports having SDM on another
path/drive (some routers have a way to tell where HTML files are, but some
may be not).
Good luck,
Mike
CCNP, CCDP, CCSP, Cisco Voice, MCSE W2K, MCSE+I, Security+, etc.
CCIE R&S (in progress), CCIE Voice (in progress)
------
Headset Adapters for Cisco IP Phones
www.ciscoheadsetadapter.com
www.headsetadapter.com
<JeroenOss1977@xxxxxxxxx> wrote in message
news:1193733574.518171.30010@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hi guys,
I have a cisco 1841 with a HWIC-AP installed and using c1841-
advsecurityk9-mz.124-11.T.bin
After I copied the new bin file to the CF card SDM failed initial
installation. Also with the original CF card the installation doesn't
start.
I receive the 404 Page cannot be found error in IE an Mozilla.
Some things I tried:
- going back to factory defaults
- changing JAVA version from 1.4.2 tot 1.6
- Re-configure HTTP settings including new user with privilege 15
Does anyone have a clue? It seems that I would need a CD-Rom version
to re-install SDM on the router? In that case, I have 2 problems,... I
don't have a Cisco COO account and a previous IT guy took the CD-ROM
with him.
Any help appriciated.
Regards,
Jeroen
.
- Follow-Ups:
- Re: SDM initial install won't start
- From: JeroenOss1977
- Re: SDM initial install won't start
- References:
- SDM initial install won't start
- From: JeroenOss1977
- SDM initial install won't start
- Prev by Date: Re: 2924 console questions
- Next by Date: Re: Access to router without enable password ? (cisco 3620)
- Previous by thread: SDM initial install won't start
- Next by thread: Re: SDM initial install won't start
- Index(es):
Relevant Pages
|