SDM initial install won't start

Hi guys,

I have a cisco 1841 with a HWIC-AP installed and using c1841-
advsecurityk9-mz.124-11.T.bin

After I copied the new bin file to the CF card SDM failed initial
installation. Also with the original CF card the installation doesn't
start.

I receive the 404 Page cannot be found error in IE an Mozilla.

Some things I tried:
- going back to factory defaults
- changing JAVA version from 1.4.2 tot 1.6
- Re-configure HTTP settings including new user with privilege 15

Does anyone have a clue? It seems that I would need a CD-Rom version
to re-install SDM on the router? In that case, I have 2 problems,... I
don't have a Cisco COO account and a previous IT guy took the CD-ROM
with him.

Any help appriciated.

Regards,
Jeroen

.

Relevant Pages

  • Re: OSD dosnt work with CISCO DHCP and VLANs
    ... Is it the CISCO box and in that case what is missing/wrong or is it WinPE? ... normal RIS installation, but if I choose my OSD image during F12 installation ... >>of several VLANs and a CISCO DHCP server. ...
    (microsoft.public.sms.tools)
  • Re: Safari und https auf G5 langsamer als G3
    ... Nehmen wir also an diese Installation ist "kaputt". ... an Netzwerksoftware nur Cisco VPN (keine 3rd ... Prev by Date: ... Next by Date: ...
    (de.comp.sys.mac.misc)
  • Re: SDM initial install wont start
    ... Could you cut and paste a "dir" of the flash? ... Also with the original CF card the installation doesn't ... don't have a Cisco COO account and a previous IT guy took the CD-ROM ...
    (comp.dcom.sys.cisco)
  • Re: Cisco CTI port lineOpen failure
    ... I think there is no problem with Cisco TSP installation. ... working properly with the particular CTI port. ... soft phone application. ...
    (microsoft.public.win32.programmer.tapi)
  • Re: SDM initial install wont start
    ... IOS usually expects to see SDM files in the same directory (at least at the ... Headset Adapters for Cisco IP Phones ... Also with the original CF card the installation doesn't ... don't have a Cisco COO account and a previous IT guy took the CD-ROM ...
    (comp.dcom.sys.cisco)