Re: ASA 5510 Security Plus - 5 FE interfaces




The answer to your question can be found in the following TAC article:

http://www.ciscotaccc.com/kaidara-advisor/security/showcase?case=K80901659


"

The management interface is a Fast Ethernet interface designed for
management traffic to the ASA only.
It is specified as management0/0.

The management interface can be used for the traffic that passes
through the firewall as well.
The Security Plus License for the ASA 5510 is required in order to use
the management0/0 port
as a regular interface.

With a base license on the 5510, the management0/0 port cannot be used
as a regular interface.

"

.



Relevant Pages

  • Re: Which cable for ASA failover?
    ... Can you post your failover config of both unit. ... interface Ethernet0/0 ... mtu management 1500 ... timeout xlate 3:00:00 ...
    (comp.dcom.sys.cisco)
  • Re: Which cable for ASA failover?
    ... Can you post your failover config of both unit. ... interface Ethernet0/0 ... mtu management 1500 ... timeout xlate 3:00:00 ...
    (comp.dcom.sys.cisco)
  • Re: SGS 5400 firewalls
    ... SGMI (port 2456) is only accessible via the interface that is ... designated as the 'Inside' interface as configured via the front panel LED. ... vulnerability management needs. ... Download FREE whitepaper on how a managed service can help you: ...
    (Pen-Test)
  • Re: ASA5510 with Cisco VPN client. No traffic over VPN tunnel
    ... description Interface connected to Internet ... mtu Company-lan 1500 ... mtu management 1500 ...   message-length maximum 512 ...
    (comp.dcom.sys.cisco)
  • Re: ASA5510 with Cisco VPN client. No traffic over VPN tunnel
    ... description Interface connected to Internet ... mtu management 1500 ... group-policy ClientVPN attributes ...   message-length maximum 512 ...
    (comp.dcom.sys.cisco)