Re: VPN Client ---> 1841 router

It works fine when changing the subnet to something like
192.168.77.1-5

Still wanted it to work into the same subnet though - something
similar to a VPN PPTP. It that technically possible on a 1841?

Kailash

On Oct 2, 12:31 pm, Merv <merv.hr...@xxxxxxxxxx> wrote:
On Oct 2, 3:53 am, Gerald Krause <news-o...@xxxxx> wrote:





Merv schrieb:

On Oct 1, 5:59 pm, Gerald Krause <news-o...@xxxxx> wrote:
kaila...@xxxxxxxxx schrieb:

Hi,
Getting a weird problem on a1841when trying to set up theVPNIPSec.
Seems that i can connect successfully to the router; can telnet to it
but cannot go beyond it. e.g can telnet to 10.163.1.253 but not to
10.163.1.1 directly. Can telnet to 10.163.1.1 only from the router.
crypto isakmp client configuration group MAURICIA_VPN
key ABC
pool SDM_POOL_1
netmask 255.255.255.0
Try to omit the netmask statement.

!
interface FastEthernet0/0.1
description $ETH-LAN$$FW_INSIDE$
encapsulation dot1Q 10
ip address 10.163.1.253 255.255.255.0
ip access-group 102 in
no ip redirects
no ip proxy-arp
I suspect you have to enable proxy ARP on the 10.163.1.0/24 interface
(F0/0.1) for making the ARPs work (as Merv already mentioned).

proxy-ARP is a virus.

Ack. My intention was to solve this particular problem but I agree that
a routed setup would be better (if possible).

--
Gerald (ax/tc)- Hide quoted text -

- Show quoted text -

I believe that the OP can address his issue by changing the IP address
space used for the local ip pool.

Using a distinct IP address space for the pool has a number of
advantages.- Hide quoted text -

- Show quoted text -


.

Relevant Pages

  • Re: I can access OWA from local subnet but not from the Internet.
    ... Im not getting anything when I telnet to my public ... tried both from same subnet through the common default gateway and from ... In the certificate I filled in the DNS name I have registered with my ISP, ... >> I have installed SBS 2003 STD, I can recieve mail routed via DNS to the ...
    (microsoft.public.windows.server.sbs)
  • Re: telnet through com port
    ... Could you not "join" the same subnet by changing the mask to be the same? ... I have a utility that can read it's settings through a com port, ... >>>Is it possible to telnet through a com port and if so, ...
    (microsoft.public.windowsxp.general)
  • Re: Very basic JetDirect
    ... The latest version of JetAdmin seems to be for other machines besides mine. ... Change the IP address of the computer to one that's compatible with (on the same subnet as) the current address of the printer. ... Change the IP address of the printer using either telnet or the printer's Web interface. ... A net dude told me I look for a range of assigned MAC addresses for the vender, and do some kind of scan for MAC addresses. ...
    (comp.periphs.printers)
  • Re: Very basic JetDirect
    ... The latest version of JetAdmin seems to be for other machines besides mine. ... subnet as) the current address of the printer. ... A net dude told me I look for a range of assigned MAC addresses for the vender, and do some kind of scan for MAC addresses. ... the computer's address to 192.168.2.51, for example, and you should be able to telnet to the printer and change the address. ...
    (comp.periphs.printers)
  • Re: Very basic JetDirect
    ... that is already on the subnet and using it. ... and do some kind of scan for MAC addresses. ... It seems SO straightforward, this config. ... >> be able to telnet to the printer and change the address. ...
    (comp.periphs.printers)