Re: SIP incoming calls in CCM

On 27 Sep, 22:56, "headsetadapter.com" <for-s...@xxxxxxxx> wrote:
I assume you are talking about CCME (CallManager Express)? What version you
are?

Here is a link on how to configure CCME with a service provider. You can use
it as a reference.

http://express-press-release.com/27/Configuring%20SIP%20Trunk%20Suppo...

... and another example:

http://www.cyberdata.net/support/voip/server/SIP_Configuration_for_Ci...

Good luck,

Mike
CCNP, CCDP, CCSP, Cisco Voice, MCSE W2K, MCSE+I, Security+, etc.
CCIE R&S (in progress), CCIE Voice (in progress)
------
Headset Adapters for Cisco IP Phoneswww.ciscoheadsetadapter.comwww.headsetadapter.com

"MadAlex" <alessio.pompi...@xxxxxxxxx> wrote in message

news:1190908833.813494.132690@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx



Hello,

I've configure a Cisco Call Manager to send outgoing calls to a a SIP
trunk (configured an outgoing dial-peer).
I'm trying to receive calls from the same SIP trunk, but I got 530
(internal error) on the SIP server that tries to send the call.
How can I receive calls? Do I have to configure a new dial-peer for
the incoming calls?

I have SIP trunk on Call manager
(not express) with a voice gw with a private T1.

<CCM-cluster><--SIP-->VGW<---T1-to other kit--->

VGW has:

dial-peer voice 100 voip
description USA
preference 4
destination-pattern 9001718.......
session protocol sipv2
session target ipv4:10.1.1.1
session transport udp
codec g711ulaw

CCM end was pretty much defaults. Can port it if required.


.

Relevant Pages

  • ISDN dial-peers
    ... I've configured voice dial-peers for outgoing ... but I cannot receive incoming calls. ... isdn switch-type basic-net3 ... dial-peer voice 20 pots ...
    (comp.dcom.sys.cisco)
  • Re: Voicework
    ... I have some voice samples at the link below: ... Does it change session to session, or can you say for any ... how much voice recording experience they have. ... The subtle differences between the various professional mics ...
    (rec.audio.pro)
  • Cisco 1760 and Voice SIP ?
    ... I have a card with 2 FXO port ... For connect this 1760 at my SIP Voice Serveur (Asterisk) ... session target ipv4:192.168.50.15:5060 ... retry response 3 ...
    (comp.dcom.sys.cisco)
  • Re: Voicework
    ... I have some voice samples at the link below: ... Does it change session to session, or can you say for any ... how much voice recording experience they have. ...
    (rec.audio.pro)
  • Re: Canīt send a fax without having to hang-up the phone
    ... When making a voice call, with a standard fax machine, you can switch modes, ... during the same session without hanging up the line. ... However, I have never seems any computer faxing system, Windows or Unix, ...
    (microsoft.public.windowsxp.print_fax)