Re: Cisco 857 config question.




"Oliver Garraux" <olrbengax@xxxxxxxxx> wrote in message
news:1190963014.473052.169870@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
On Sep 27, 9:46 pm, "Marc" <modzelewskitriana4...@xxxxxxxxxxxxxxx>
wrote:
I currently use an 837. In addition to the dialer config, I have acl's,
port
forwarding etc.

I've read that the 857 and 877 are 'fixed-configuration routers.' I'd
like
to upgrade to one but need to be able to configure it via the IOS. '

After two days of looking, I still can't find the answer. Is it possible
to
'custom' configure these or are they just plug and play type routers?
Thanks.

When Cisco says fixed configuration, they mean that the routers/
switches/etc cannot take any hardware modules (like WAN Interface
Cards). Those routers do run IOS and you'll be able to configure them
via IOS. You just can't add or remove any of the interfaces, they are
built into the router.

Ah. That clears it up. Thanks Oliver.


.



Relevant Pages

  • Re: ADSL interface attenuation
    ... Zyxel routers can do time-based access rules. ... Getting a DSL ... until the firmware was changed. ... the IOS and is a free download. ...
    (comp.dcom.sys.cisco)
  • VOIP problem in Cisco 1751V
    ... Cisco 1751V with IOS 12.3. ... The two routers are connected via leased ... I have seen in some site that this is due to some IOS Bug. ... able to browse the Cisco Bug Navigator as I dont have a CCO account. ...
    (comp.dcom.sys.cisco)
  • Re: GB Ethernet WAN between two 6000s
    ... We are planning to replace our existing 10Mb Ethernet WAN ... The 10mb is currently between two 3600 routers. ... mode sometimes), or just IOS. ... With hybrid you use CatOS to define a VLAN at L2, ...
    (comp.dcom.sys.cisco)
  • Re: Cisco 857 config question.
    ... to upgrade to one but need to be able to configure it via the IOS. ... 'custom' configure these or are they just plug and play type routers? ... switches/etc cannot take any hardware modules (like WAN Interface ... Those routers do run IOS and you'll be able to configure them ...
    (comp.dcom.sys.cisco)
  • Re: Cisco 857 config question.
    ... to upgrade to one but need to be able to configure it via the IOS. ... switches/etc cannot take any hardware modules (like WAN Interface ... Those routers do run IOS and you'll be able to configure them ...
    (comp.dcom.sys.cisco)