I have an 1841 that I am running a L2L tunnel on.
I have an address NAT to an inside address.
The nat works fine. The issue is when I try to ftp to the NAT address
it is really clunky.
It's slow and sometimes times out.
Re: GRE tunnel and NAT ... and ships it over the GRE tunnel... When R1 gets the packet from the tunnel, I expected it to NAT again ...interface Loopback0... (comp.dcom.sys.cisco)
Re: Forest or External Trusts Through NATed Firewall ... You're right that a tunnel is the way to go here. ...NAT boundary.... is it possible to create a Forest or External Trust ... Firewall to the old domain DNS and generate a get response.... (microsoft.public.windows.server.active_directory)
Re: ISA 2004 site to site ipsec mit third party ...NAT... >> wir haben Pre Shared Keys umgestellt und der Tunnel wird jetzt aufgebaut. ... >> Eine Verbindung zum internenremotenetzwerk gelingt noch nicht. ... > In der ISA Serververwaltung kannst Du Dir den Tunnel anschauen, ... (microsoft.public.de.german.isaserver)
Re: Complete VPN Fundamentals and VPN Router RV042 ... one) that provides a PPTP-based VPN server integrated into it... ... >machine to use an IPSEC VPN through a NAT device to a host. ... >for the router, as well. ... >> tunnels in the IPsec policy is the same as Tunnel Mode ... (microsoft.public.windowsxp.work_remotely)
Re: [fw-wiz] PIX to ASA VPN using PAT ... Use the IP address out of your NAT or PAT fur you crypto map. ... description the devices on end of tunnel... My side of the network is NAT'd, so I want to allow one specific host from my inside network to get out out through the tunnel to their network. ... (Firewall-Wizards)
