Re: RSM 5500

adamp@xxxxx writes:
Hello,
I am trying configure communication beteewn vlan on catalyst 5500
with RSM WS-X5302 but I cant find command ip routing and router. What
can I do to !

interface Vlan11
description xxx
ip address 89.9.64.65 255.255.255.192
no ip route-cache
!
interface Vlan12
description xxx
ip address 89.9.64.129 255.255.255.192
no ip route-cache

Please help me.


The RSM is a seperate console.

You configure switching on the Sup. You then access the RSM console
with the session command (or over its console port) and configure
routing on the RSM console.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/cnfg_nts/rsm/4058_01.htm

Your commands above look like l2 switching commands entered in the sup only.

Cisco never did a native combined together IOS for the 5500, that only
went into the 6500 for certain setups, or the 4500 SupIV and up.

.

Relevant Pages

  • Re: RSM 5500
    ... with RSM WS-X5302 but I cant find command ip routing and router. ... The Supervisor side uses command such as "set vlan" ...
    (comp.dcom.sys.cisco)
  • NTBACKUP RSM EJECT and VIEW Commands
    ... RSM Eject and VIEW commands syntax are slightly different from WINDOWS 2000 ... automating an EJECT command is not working. ...
    (microsoft.public.windows.server.general)
  • Re: Does RSM is supported by the .NET Framework?
    ... all the details) that used RSM. ... At that time we couldn't find any kind of managed interface. ... the bulk of our requirements using the RSM.EXE command line - called ... expose the command we needed. ...
    (microsoft.public.dotnet.languages.csharp)
  • Re: NTBACKUP RSM EJECT and VIEW Commands
    ... the view command to see your ... changer needs the /t arguement, but notice there is no space after the ... > RSM Eject and VIEW commands syntax are slightly different from WINDOWS ...
    (microsoft.public.windows.server.general)