Re: probably an easy routing question, so please help ... plugged into the same gigabit switch as Server B in Block 2 and they ... from a 10Mb link to the router and the computers are both hooked into ... not run out the 10Mb port to the router with all of its traffic, ... nodes in the two networks you don't own. ... (comp.dcom.sys.cisco)
Re: Using Remote Desktop From an SBS Domain ... when you tried to RDP while attached directly to a port on your router?... So if 3389 needs forwarded on the client end too then that is what the ... Hopefully next week I can attempt a connection while my ISP watches the ... (microsoft.public.windows.server.sbs)
Re: Port Forwarding ...(Linksys 8 Port Gigabit)... This way i dont have to go through the router.... or switch to a static IP. ... (microsoft.public.windows.server.sbs)
Re: Port Forwarding ...(Linksys 8 Port Gigabit)... This way i dont have to go through the router.... router, but not the switch..... (microsoft.public.windows.server.sbs)
Re: bridging ...router other than to confirm settings. ... This one does not have a DMZ port.... the LAN port to the switch.... >> router, the DMZ port to the LAN server, and the LAN port to the switch ... (microsoft.public.win2000.networking)
