Replacing Flash Memory

From: Chris <christopher.bloomfield@xxxxxx>
Date: Fri, 29 Jun 2007 01:35:47 -0700

Hi all,

I have a few Cisco 2960 24 and 48 port switches plus a couple of Cisco
3560 24 port switches. As part of our repair procedure for cold swap
we are looking at swapping over the flash memory from the potential
faulty box to the new box in order for quick config load. However, I
cannot seem to find any documentation about changing the flash memory
on these switches. Are they soldered in or are they removable?

Thanks in advance,

Chris

.

Follow-Ups:
- Re: Replacing Flash Memory
  - From: Doug McIntyre
- Re: Replacing Flash Memory
  - From: Trendkill

Prev by Date: Re: NAT on a stick
Next by Date: Re: The $2.3 million home lab of Scott Morris, Quadruple CCIE
Previous by thread: The $2.3 million home lab of Scott Morris, Quadruple CCIE
Next by thread: Re: Replacing Flash Memory
Index(es):
- Date
- Thread

Relevant Pages

Re: Replacing Flash Memory
... I have a few Cisco 2960 24 and 48 port switches plus a couple of Cisco ... As part of our repair procedure for cold swap ... cannot seem to find any documentation about changing the flash memory ...
(comp.dcom.sys.cisco)
differnce between a 2950 xl and a 2950 Cisco switch?
... I've been asked to purchase 4 Cisco 24 port switches. ... The vendor tells ... me that he does not have the 2950 XL in stock but does have the 2950's ...
(comp.dcom.sys.cisco)