SYSLOG Question

From: "Haitingus" <marc.halleux@xxxxxxxxx>
Date: Thu, 28 Jun 2007 20:54:57 +0200

Hi,

We configured TACACS on our switches and we now would like to send
authentication related message to our syslog (eg: Authentication
successfull, or unsuccessfull etc...).

Is there a way to have this send to the syslog? I tested by putting the
logging trap to debug, but even in that case, i did not get anything about
the authentication in the syslog.

Thank you for your help,
Marc.

.

Follow-Ups:
- Re: SYSLOG Question
  - From: Scott Perry
- Re: SYSLOG Question
  - From: Aaron Leonard
- Re: SYSLOG Question
  - From: M
- Re: SYSLOG Question
  - From: Steve Ray

Prev by Date: Re: Not able to hit 2950
Next by Date: Re: Not able to hit 2950
Previous by thread: Not able to hit 2950
Next by thread: Re: SYSLOG Question
Index(es):
- Date
- Thread

Relevant Pages

Re: pppd call problem
... but the pppd disconnect me after the ... The syslog is the following, i use chap and i change ... it looks like an authentication issue. ... precisely that, junk. ...
(comp.protocols.ppp)
Re: SYSLOG Question
... We configured TACACS on our switches and we now would like to send authentication related message to our syslog (eg: Authentication successfull, or unsuccessfull etc...). ...
(comp.dcom.sys.cisco)
Re: SYSLOG Question
... We configured TACACS on our switches and we now would like to send ... authentication related message to our syslog (eg: ... successfull, or unsuccessfull etc...). ... Is there a way to have this send to the syslog? ...
(comp.dcom.sys.cisco)
Re: SYSLOG Question
... And i receive syslog message. ... You could then generate a few messages to be sent to the syslog server by ... Saving the config will also generate a message to be sent to the syslog ... authentication related message to our syslog (eg: ...
(comp.dcom.sys.cisco)