Re: 6500

hi, thanks for your response

i have configured my port in switch access mode but i think youre are right
i should configure port in trunck mode

i have'nt use cross cable becaus it was fibre connection



"Trendkill" <jpmason@xxxxxxxxx> a écrit dans le message de news:
1180437998.337165.107110@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
On May 29, 4:37 am, "pierre" <p...@xxxxxxxxxxxxxxxxxx> wrote:
ios 12.2(17r)S2(Fc1)

hi,
i am beginner
i wish interconnect two 6500 router by gigabit ethernet with no ip
address
like a switch

does any body know how do that ?

So connect them. Either configure the ports as access ports (set vlan
XX mod/port), or configure the ports as trunks. The commands will be
slightly different if its native ios code versus catalyst, but this is
very straightforward. What specific part are you having issues with?
Also need a crossover since its switch to switch.



.

Relevant Pages

  • Re: probably an easy routing question, so please help
    ... plugged into the same gigabit switch as Server B in Block 2 and they ... from a 10Mb link to the router and the computers are both hooked into ... router with gig ports, you will potentially have limits for any ...
    (comp.dcom.sys.cisco)
  • Re: Configuring Cisco IPS High Bandwidth Using EtherChannel Load Balancing
    ... "If the paired interfaces are connected to the same switch, ... VLANs for the two ports. ... IPS is able to track traffic per-VLAN, ... VLAN Pair mode uses one interface only and this is the only supported ...
    (Focus-IDS)
  • Re: probably an easy routing question, so please help
    ... plugged into the same gigabit switch as Server B in Block 2 and they ... from a 10Mb link to the router and the computers are both hooked into ... router with gig ports, you will potentially have limits for any ...
    (comp.dcom.sys.cisco)
  • Re: running out of IP Address! help!
    ... I believe it could handle 4096 VLANs + router interfaces. ... a layer-3 switch is the way to go. ... having subnets won't prevent broadcasts. ... will only hit ports that are members of that VLAN, ...
    (microsoft.public.win2000.networking)
  • Re: Auto-sensing for IPS devices
    ... Auto-Negotiation is essential in larger networks. ... about 1000's of switch ports and PC's connecting/disconnecting ... the ports at whatever they need to be. ... > you MUST set BOTH speed and duplex settings and you MUST set BOTH ...
    (Focus-IDS)