Re: isdn backup ddr
- From: "Steve Ray" <nochance@xxxxxxx>
- Date: Mon, 30 Apr 2007 14:39:22 +0100
Possible guess ! If you are using user accounts/passwords to connect check these are correct at both ends
Steve
"Anis" <a.smajlovic@xxxxxxxxxxxxxxxx> wrote in message news:4635da24@xxxxxxxxxxxxxxxxx
hi i have 2 router on router1 i set this
isdn switch-type basic-net3
interface BRI0/1/0
ip address 10.10.0.1 255.255.255.0
encapsulation ppp
dialer string xxxxxx
dialer load-threshold 128 either
dialer-group 1
isdn switch-type basic-net3
isdn point-to-point-setup
ip route 10.10.0.0 255.255.255.0 BRI0/1/0 200
access-list 101 permit ip any any
dialer-list 1 protocol ip list 101
and on router2
isdn switch-type basic-net3
interface BRI0/1/0
ip address 10.10.0.2 255.255.255.0
encapsulation ppp
dialer-group 1
isdn switch-type basic-net3
isdn point-to-point-setup
ip route 10.10.0.0 255.255.255.0 BRI0/1/0 200
access-list 101 permit ip any any
dialer-list 1 protocol ip list 101
and when i want to ping 10.10.0.2
i get this
*Apr 30 14:06:49.651: %ISDN-6-CONNECT: Interface BRI0/1/0:1 is now connected to
xxxxxx N/A.
*Apr 30 14:06:51.679: %ISDN-6-DISCONNECT: Interface BRI0/1/0:1 disconnected fro
m xxxxxx , call lasted 2 seconds
*Apr 30 14:06:51.779: %LINK-3-UPDOWN: Interface BRI0/1/0:1, changed state to dow
n
*Apr 30 14:06:52.899: %LINK-3-UPDOWN: Interface BRI0/1/0:1, changed state to up
*Apr 30 14:06:52.899: %ISDN-6-CONNECT: Interface BRI0/1/0:1 is now connected to
xxxxxx N/A.
*Apr 30 14:06:53.031: %LINK-3-UPDOWN: Interface BRI0/1/0:1, changed state to dow
n
*Apr 30 14:06:54.899: %LINK-3-UPDOWN: Interface BRI0/1/0:1, changed state to up
*Apr 30 14:06:54.899: %ISDN-6-CONNECT: Interface BRI0/1/0:1 is now connected to
xxxxxx N/A.
*Apr 30 14:06:55.035: %LINK-3-UPDOWN: Interface BRI0/1/0:1, changed state to dow
n
*Apr 30 14:06:56.903: %LINK-3-UPDOWN: Interface BRI0/1/0:1, changed state to up
*Apr 30 14:06:56.903: %ISDN-6-CONNECT: Interface BRI0/1/0:1 is now connected to
xxxxxx N/A.
Success rate is 0 percent (0/5)
r1#
*Apr 30 14:06:57.047: %LINK-3-UPDOWN: Interface BRI0/1/0:1, changed state to dow
n
when i do debug isdn errors get tthis:
5)
*Apr 30 14:08:21.747: ISDN 000000000000 Error: Invalid DSL (0) SERROR: isdn_get
_display_text_from_gtd: false ret
*Apr 30 14:08:21.747: ISDN 000000000000 Error: Invalid DSL (0) Error: Invalid D
SL (0) SERROR: isdn_get_mlpp_from_gtd: MLPP from GTD failed
*Apr 30 14:08:21.751: ISDN BR0/1/0 SERROR: L2_Go: at bailout DLCB is NULL
L2: sapi 63 tei 127 ces 0 ev 0x650
*Apr 30 14:08:21.751: ISDN BR0/1/0 **ERROR**: handle_l2d_srq_mail: Layer 1 inact
ive
*Apr 30 14:08:21.943: ISDN BR0/1/0 SERROR: LM_MDL_ASS_IND: Unexpected state. Ass
ignment state 1.
*Apr 30 14:08:23.751: ISDN BR0/1/0 SERROR: L2_Go: at bailout DLCB is NULL
L2: sapi 63 tei 127 ces 0 ev 0x650
*Apr 30 14:08:23.771: ISDN BR0/1/0 SERROR: L2_Go: at bailout DLCB is NULL
L2: sapi 63 tei 127 ces 0 ev 0x3
*Apr 30 14:08:23.783: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/1/0, TEI 81 ch
anged to up
*Apr 30 14:08:24.411: %LINK-3-UPDOWN: Interface BRI0/1/0:1, changed state to up
*Apr 30 14:08:24.411: %ISDN-6-CONNECT: Interface BRI0/1/0:1 is now connected to
271440 N/A
show isdn status
r1#show isdn status
Global ISDN Switchtype = basic-net3
ISDN BRI0/1/0 interface
dsl 2, interface ISDN Switchtype = basic-net3
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 81, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 2 CCBs = 0
The Free Channel Mask: 0x80000003
Total Allocated ISDN CCBs = 0
r1#
did anyone know what is problem ???
.
- Follow-Ups:
- Re: isdn backup ddr
- From: Anis
- Re: isdn backup ddr
- References:
- isdn backup ddr
- From: Anis
- isdn backup ddr
- Prev by Date: Pix 515 - possible issue with Email Relaying
- Next by Date: Re: No LAN connectivity on Pix 515E
- Previous by thread: isdn backup ddr
- Next by thread: Re: isdn backup ddr
- Index(es):
Relevant Pages
|
|
