Re: RFC layer 3 ethernet device for high bw application
- From: linguafr <billf@xxxxxxxxxxxxxxxx>
- Date: 28 Apr 2007 19:08:10 -0700
Ok, now understand the part about the packets getting punted if any of
the required features aren't supported by cef.
This doc claims cef support for GRE
http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a00804309f5.html#wp1050256
But can't find any mention of cef support for NAT.
.
- Follow-Ups:
- Re: RFC layer 3 ethernet device for high bw application
- From: stephen
- Re: RFC layer 3 ethernet device for high bw application
- References:
- RFC layer 3 ethernet device for high bw application
- From: linguafr
- Re: RFC layer 3 ethernet device for high bw application
- From: Scooby
- RFC layer 3 ethernet device for high bw application
- Prev by Date: Re: RFC layer 3 ethernet device for high bw application
- Next by Date: Re: No LAN connectivity on Pix 515E
- Previous by thread: Re: RFC layer 3 ethernet device for high bw application
- Next by thread: Re: RFC layer 3 ethernet device for high bw application
- Index(es):
